ELECTRO PERMANENT LIFTING MAGNETS WITH BATTERY SUPPLY MAXIMUM SAFETY ENERGY FRIENDLY The magnet is activated by a 95% less energy short current pulse. consumption than The effective force is traditional electromagnets. generated by permanent A short current pulse magnets. is enough to activate / The safety factor of 3 deactivate the magnet. guarantees safe operation, The powerful rechargeable even with rough and dirty battery guarantees 500 to workpieces. 600 cycles. ERGONOMIC No power cable required. Manual operation by using the magnet’s control panel or by the radio remote control. NEW! Automatic switching between MAG and DEMAG via the proximity switch. V-shape execution of the magnetic base for lifting flat and cylindrical workpieces. 1 The proximity switch prevents demagnetization in the air and starts the MAG and DEMAG cycle when AUTO-cycle selected. • Safety factor 3:t1 • 6 models from 500 kg to 5000 kg • Choice between automatic or manual operation • PICKUP cycle with adjustable force at 3 levels, for lifting 1 single plate from a stack. • Radio remote control • Inductive proximity switch against accidental demagnetization in the air. Inductive proximity switch Battery level indication Selector switch manual / automatic PICK-UP force setting on 3 levels Digital illuminated push buttons

SERIE HBEP DIMENSIONS (MM) VOLTAGE CHARGING WEIGHT ALSO AVAILABLE: DEALER: MODEL HBEPR: Electro permanent lifting magnets with battery supply for lifting of heavy cylindrical pieces. MODEL HBEPS: Electro permanent magnetic beam with battery supply for lifting of HEA-HEB-IPE-IPN profiles up to a length of 24,000 mm. MODEL HBEPP: Electro permanent magnetic beam with battery supply for lifting of single steel plates.