Safety through power >

Magnetism is the smartest way of handling ferrous loads. Tecnomagnete has continuously researched and developed permanent-electro magnets for 30 years, the only technology that combines safety, strength, convenience and power savings.Tecnolift systems can handle loads with extreme easiness in the minimum area. They are efficient because they always operate from the top without compressing or deforming the load. The floor space is optimized as no empty areas are required around or in between the loads to get access for their pick up.No other solution can grant the same level of performances and...

In the production process: TECNO-LIFT doesnt leave residual magnetism in the load. All problems caused normally by the residual magnetism on welding or precision machining operations are eliminated. > The robust solid block construction of Tecnolift magnetic modules with no moving parts inside, no stress and no overheat in the magnet coils can grant a long reliability without specific maintenance. The expensive back up maintenance is also avoided. Tecnolift systems are designed and built to be compact, light weight, powerful and reliable. The vast array of standard models provides various characteristics...

on flat surface in FeӔ minimum thickness 30mm with all poles covered.Temp. < 100C Safety coefficient = 1:3 > Load (kg) Force (daN)

Model thickness. length rated lift TB min. min. max capacity max mm mm mm kg TB 4/35 4 2500 6000 3500 TB 4/100 5 3000 12000 10000 TB 6/35 4 2500 12000 3500 >

Safety coefficient = 1:3on flat surface in FeӔ minimum thickness 30mm with all poles covered.Temp. < 100C > Model module thickness. length width rated lift SML weight min. min. max min. max capacity max kg mm mm mm mm mm kg SML 50 500 8 1000 5000 1000 2500 5000 > 80ؘ C E SML 100 700 8 1000 5000 1000 2500 10000 SML 150 1000 8 1000 5000 1000 2500 15000 Air gap mm >

on flat surface in FeӔ minimum thickness 100 mm with all poles covered.Temp. < 100C >

Model weight Ext. Int. ؘ Height rated lift CV /T min - max max min - max capacity max kg mm mm mm kg CV /T 10 500 560-1000 460 140-300 1000 CV /T 15 565 800-1300 610 50-250 1500 CV /T 30 610 600-1150 508 20-500 3000 CV /T 40 1200 800-1450 508 30-500 4000 CV /T 50 1500 800-1800 508 30-500 5000 >

Permanent-electro magnetic modules for handling layers of billets up to 600 C Ж in the core. Versions:BL /S single module for billets up to 6.000 mm length BL /D double modules for billets up to 12.600 mm length > Modules for handling slabsTypical application: on harbour cranes, to load/unload ships. Versions:BR /S single module for slabs with length 1.000 - 8.000 mm BR /D double modules for slabs with length 6.000 - 12.000 mm BR /W "twin" module with mechanical auto-levelling system for loads 6.000 - 12.000 mm length > 3 Ton capacity permanent-electro lifters with battery. Equipped with a remote...

Control Unit In a compact IP54 cabinet to allow fast activation and deactivation cycles (max 7 sec) 1- Push button panel Is integrated in the body of the lifter and contains the basic functions (ON/OFF, PICK-UP, FULL MAG, DEMAG, SAFE) 2- The electronic UCS saturation control 6- The push button remote includes the 3- PICK-UP, FULL MAG system controls the correct value of the current absorbed to ensure that the modules reached the full magnetic saturation. * The TECNO-LIFT system uses a double magnetization cycle test the load according to its weight and airgap condition. Pick-up cycle is executed...

Lamp Block To display the status of the system: Normal operation / Pick Up phase / Alarms > DAUTANAC Is the safety contact that allows the magnetization / demagnetization only when the chains are slack. This contact prevents the accidental demagnetization when the load is suspended. Remote Control Enables the operation of the system (pickup/ full mag/ safe/ open/ close) from outside the working area and away from the load. The new model is ergonomic, with emergency stop button and APC power adjustment knob. Supplied with frequency regulator, two re-chargeable batteries and charger (110V or 220V)...

Tecnomagnete: all the magnetism of the leader. > Here is a strong statement: Tecnomagnete has revolutionized the world of work holding! Do you want a stronger one? The QuadSystem!This permanent electro magnetic system generates a concentrated and predetermined force that is highly effective to clamp steel parts on machine tools, moulds for injection molding and dies for metal stamping machines, and the handling of ferrous loads. Weve believed in the force of our QuadSystem patent and many companies have believed in this powerful innovative technology. The large variety of applications of over...