Permanent-electro magnetic systems TECNOLIFT line - Magnetic lifting systems Hand controlled magnetic lifters www.mag-tecnomagnete.com

Hand controlled magnetic lifters Safe and handy lifting MaxX magnetic lifters are the ideal solution for handling any steel workpiece any steel workpiece whether rough or finished. Their compact size and low weight maximize the crane capacity through a range of models with lifting capacities (WLL) from 125 kg to 2000 kg and specific versions for round surfaces and thin material.

Hand controlled magnetic lifters MaxX lifter for every need in manufacturing The polar geometry is designed to fit loads of all kinds perfectly with both flat and round surfaces while minimizing operating air gaps. The TG series maximizes the magnetic performance for lifting thin sheet metal and pipes.

Hand controlled magnetic lifters A design of excellence and a perfect constructive realization The monoblock structure of the MaxX lifter is machined with high-precision details to ensure maximum magnetic efficiency and operational reliability. High-energy Neodymium permanent magnets are placed inside dedicated slots of the stator and inside the rotor core in order to be protected in case of shocks during use. The magnetic rotor rotates inside the magnetic stator always maintaining the same distance over time thanks to the precision machining, the use of bearings and a unique manufacturing process...

Hand controlled magnetic lifters The details make the difference The ball bearings located at the ends of the MaxX are an integral part of the monoblock and ensure smooth rotation of the activation lever and reliability over time . The handle - secure and ergonomic - is easy to grip even with working gloves to perform magnetization and demagnetization cycles. The hooking detail is designed for the firm and secure coupling with the lifting hook. The safety catch of the lever - simple but effective - ensures optimal operation even after years of work. Its position clearly shows the operator when...

Hand controlled magnetic lifters Double magnetic generator The flux generated by the high-energy permanent magnets placed in the stator slots is added to those inside the rotor for a double magnetic force extremely powerful to lift any type of workpiece in complete safety. Rotating the lever to the rest position draws the entire magnetic flux inside the MaxX lifter, leaving the workpiece demagnetized without any residual. In addition, the perfect balance of the magnetic fields North/ South inside the lifter prevents uncontrolled outflow of flux from the lifter body.

Hand controlled magnetic lifters A “Smart Lever” at your service for safe magnetization The path and intensity of the magnetic flux to clamp the workpiece to be lifted comes from a precise study on the angle of the stator magnets with that of the rotor. The result is the “smart” behavior of the lever which informs the operator immediately through its soft or hard rotation whether the application is safe or risky due to unsuitable operating conditions such as a high air gap, too little thickness, a partial coverage of the magnetic poles or a material that is poorly permeable to magnetism. If the...

Hand controlled magnetic lifters load (Kg) Carico (kg) Carico (kg) Round loads Flat loads Round loads Flat loads Round loads Flat loads Round loads Carico Carico Carico (kg)(kg) (kg) 0.5 0.5 1.0 1.0 0.5 0.5 1.0 1.0 0.5 0.5 1.0 1.0 Traferro Traferro (mm) (mm) air gap (mm) Traferro (mm) (mm) TraferroTraferro Traferro (mm) (mm) Forza Forza Forza(daN) (daN) (daN) Forza (daN) Force (daN) Forza Forza Forza(daN) (daN) (daN) Forza (daN) Flat loads Round loads Forza Forza (daN) (daN) Forza Force (daN) (daN) Forza (daN) load (Kg) Carico (kg) Carico (kg) Forza Forza Forza(daN) (daN) (daN) Force (daN) Forza...

Hand controlled magnetic lifters Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 0 max (mm) 400 25 3000 450 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 0 max (mm) Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 0 max (mm) Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 0 max (mm)...

MVS - Magnetic Vertical SystemFor vertical handling of plates.MVS suits loads of various sizes by changing the position of the locking pins. 63 13

MAXXIFixed beams for handling plates, rounds and profiles. MAXXI /P for sheet and plate Model Equipped with 2 units Equipped with 2 units MAXXI 1000P MAXXI 2000P MAXXI 3000P MaxX 500 MaxX 1000 MaxX 1500 MAXXI /R for round loads MAXXI 1200R Equipped with 2 units MAXXI /TG for thin sheet MAXXI 300TG MAXXI 600TG MAXXI /TG for beams and profiles Model Equipped with 2 units Equipped with 2 units Dimensions and weights Model A B C D Weight

MAG-AUTOBLOK TECNOMAGNETE SpA Headquarter Via Nerviano 31 - 20045 Lainate (MI) - ITALY Tel: +39 02 937591 [email protected] www.mag-tecnomagnete.com TECNOMAGNETE GmbH Germany - Austria Ohmstrasse 4 - 63225 Langen - GERMANY Tel.: +49 6103 750730 - Fax: +49 6103 7507311 Email [email protected] TECNOMAGNETE Inc. U.S.A. - Canada - Mexico