Die clamping quick / easy / safe Suitable for dies of any size >

A quick die clamping system changes the entire production process allowing for lean production and small batches. Quad Stamp is in the heart of this change with no hidden time to fix clamps, make adjustments or test between 2 production batches.Made up of 2 magnetic modules, its easy to install, and integrate into the existing machine and controls. >

l, and proper die operation without interference. In a few seconds with the simple pressing of a button, it is possible to clamp or unclamp the die in complete safety. Even during a power failure, the system remains operative, with constant clamping force. The die face and part cannot become magnetized, allowing for scrap remova does not magnetize the entire die , the magnetic flux penetrates the die only 20mm deep. > The Quadsystem, a safe and reliable magnetic circuit, was born from an ingenious idea in 1974. First used on machine tools, then material handling ferrous loads, and to clamp molds...

is easy to install: using bolts to mount magnetic plates to existing T-slots or tapped holes. Its modularity allows adaptability for any need. No modifications to the press are required. Quad Stamp is made to fit your press. The new reduced thickness of the modules allows to save daylight. Bigger dies can be used in smaller presses. One operator, with no tools, can operate all the die-clamping easily and in total safety, while staying outside the press. Load the die, close the press and press the button for the upper, then the lower.Smart control It is only possible to demagnetize the upper when...

Reference pins can be added to speed-up the positioning of the die. The lower magnet can have a through hole for scrap removal.The TS (T-SlotӔ) version is standard equipped with 2 T-Slots on lower module, to insert lifters.Quad Stamp s suitable for any die of any shape and size, without modification. Die standardization is not necessary, saving engineering time and overall cost. On request Quad Stamp is supplied with IPC interactive power control push-button. Through a touch-screen it is possible to control all the system functions and display the actual force generated by the magnet on each...

We reserve the right to make changes related to the technological progress. Headquarters: > Subsidiaries: France Tecnomagnete S.A.R.L. Germany Tecnomagnete GmbH Sweden Tecnomagnete A.B. USA Tecnomagnete Inc. Japan Tecnomagnete Y.K. Ltd China Tecnomagnete Shanghai R.O. Singapore Tecnomagnete Singapore R.O. >