Permanent-electro magnetic systemfor quick mold clamping the original with the red grid Flexibility > Productivity Quality > Safety Safety through power size="-5">

Many thousands installationsalready done all over the world on the best machine brands either new or already in use have proven the great economical convenience of the Quad-Press system in noumerous industrial sectors > - improved manufacturing flexibility- reduction of machine down time - better quality in molding - reduction of inventory - lean manufacturing process - practical and safe use - higher productivity In the early Β70s Tecnomagnetewas the first company to invent and offer a permanent-electro magnetic system able to perform with high power and in total safety for clamping and lifting...

A great competitive advantage Total Flexibility > Absolu Press open and mold loading Mold set up on the stationary platen by locatingring Quad-Press can be easily andquickly installed on any press by bolting the magnetic modules to the slots or holes pattern present on the machine platens without any modification. Molds of any shape and size are easily clamped without any modification of the mold base plates, even in the presence of previous QMC standardization.Quad-Press allows entire machineplatens utilization without the constraints of the traditional mold clamps and, in some cases, the mold...

Safety through power The quality of clamping withrapid mold changes, that helps to keep the working temperature, enhances the productivity of the machine,generates a significant reduction of non conforming parts. The implementation of the Just in TimeӔmanufacturingprocess translatesinto sharp reduction of inventory with the optimization of the floor space, handling costs and time. Quad-Press preventsany damage to the machine platens.No need to re-thread any stripped holes orresurface the surface of the platens with unavoidable loss of productivity. The machine and the magnetic modules will retain...

For a quick and precise mold set up. > The monoblock frame is drilled with all the fixing holes for installation and the through holes for ejectors clearance on the moving platens. > Special epoxy resinwith high thermal and dynamic resistance is used to seal the magnetic circuit. The under surface levelpositioning helps to stabilize the temperature and to avoid any possible Γair-gap in case of micro expansions. > Machined into the mono block Quad-Press frame becomes an integrated part without protruding elements that could be damaged and with better characteristics of resistance and waterproof....

The Quadsystem circuit works with the neutral yokeӔprinciple invented by Tecnomagnete where the whole magnetic flux is concentrated exclusively in the polar area.The absence of any stray flux guarantees constantperformances of the system andno trouble for the machineand mold components. The two magnetic modules for the stationary and moving side are built with a specific milling machining out of a solid steel plate.This gives the system structural stability and durability over time. > The solid blockconstructionbesides granting a perfect planarityallows to keep a reduced thickness of the Quad-Press...

Safety through power The electronics that combines functionality and simplicity Electronic control unit Remote control > Designed according to the upmostrecent standardizations Euromap, SPI, JIS.It can be interfaced with great flexibility both to new or existing machines.High level of integration can be achieved with those machine properly prearranged with interface signals. The machine enable will be availableonly when the mold is perfectly positioned and the system magnetized. The electric panel is contained in standardized watertight cabinet IP54 rated. All the operating functions are activated...