The common sense solution to clamp “unwieldy” pieces Quad Block is designed to solve typical problems during welding operations: hold parts in position and at the same time leave the area to be welded open. Clamps/Wises and other mechanical devices can solve the situation, but are not able to leave the entire area to be welded accessible; multiple set-ups are necessary to complete the weld. QB modules eliminate these limits: allow to hold the piece with power, directly through the piece/magnet contact surface and with 5 real accessible faces. Easy and safe Quadsystem technology The patented circuit...

A) Magnetic modules - n.4 permanent-electro magnetic modules, QB type - SQ50 /T configuration - n.4 fixed pole extension PFR 50/32 for each module - Fixing holes (n.2) on each module B) Junction box - 1 junction box with water-proof fast connector to the controller - n.4 wiring junction box-modules PVC cables with flexible zinc plated steel conduit (3m each) - fixed connections C) Control unit - Electronic control unit type ST100F 220V with UCS current detecting system and built-in digital pushbutton for MAG/DEMAG cycles - Wiring junction box-controller PVC cable with flexible zinc plated steel...