*mydirectindustry

Milling series

Product catalog summary

Overview: The MillTec ROUND is a circular magnetic chuck designed for 5-axis milling machines. It features reduced thickness and weight to enhance machine performance while maintaining capacity. The device includes pole extensions for lifting workpieces, enabling complete profiling, undercut machining, and through holes.

Specifications: The MillTec ROUND is available in various sizes, with diameters ranging from 400 mm to 1000 mm. The clamping force varies from 12 kN to 80 kN, depending on the model. The system includes a permanent-electro magnetic plate with a mono-block frame and a quick waterproof connector. The minimum workpiece size is 160 x 160 mm, with a minimum thickness of 18 mm.

Standard Supply: Each unit comes with a GRIP auto clamp feature, a drawing of machinable areas, a CE declaration of conformity, and a digital instruction manual. Recommended accessories include fixed and moving extensions.

Control Units: The MillTec ROUND can be paired with control units such as the ST200FA and ST200SK, depending on the version.

Contact Information: The document provides contact details for MAG-AUTOBLOK TECNOMAGNETE SpA headquarters in Italy, as well as branches in Germany, the USA, and France.

Catalog excerpts

MILLING SERIES Milling series MillTec ROUND is the circular version optimized to be installed on 5-axis machines. The reduced thickness and low weight facilitate the machine's performance while preserving the light and useful capacity of the machine. Equipped with a set of pole extensions, it allows you to lift the piece from the working surface and perform: • Complete profiling • Undercut machining • Through holes and pockets MillTec ROUND is available in MillTec Duo configuration, i.e. in combination with a solid support that raises the magnetic chuck and work-piece from the machine table for better tool access.

Open the catalog to page 1

MILLING SERIES Permanent-electro magnetic plates GRIP auto clamp with round polarity Standard supply • Permanent-electro magnetic plate with mono-block frame full metallic surface and quick waterproof connector ERGON 5 pin • GRIP auto clamp feature • Drawing of machinable areas to drill through holes for • installation based on the size of the magnetic plate • Instruction manual on digital support Model Size Poles Clamping force Weight Minimum size of work-piece: 160 x 160 mm Minimum thickness of work-piece: 18 mm Suitable control unit Cod. ST200FA (pag. 45) Available also version MILLTEC BASIC...

Open the catalog to page 2

Permanent-electro magnetic systems Technical characteristics and dimensions are not obliged. MAG AUTOBLOK TECNOMAGNETE Spa may give in every time some modifications

Open the catalog to page 3

MAG-AUTOBLOK TECNOMAGNETE SpA Headquarter Via Nerviano 31 - 20045 Lainate (MI) - ITALY Tel: +39 02 937591 [email protected] www.mag-tecnomagnete.com TECNOMAGNETE GmbH Germany - Austria Ohmstrasse 4 - 63225 Langen - GERMANY Tel.: +49 6103 750730 - Fax: +49 6103 7507311 Email [email protected] TECNOMAGNETE Inc. U.S.A. - Canada - Mexico

Open the catalog to page 4

Milling series

Milling series

Catalog excerpts

All MAG AUTOBLOK TECNOMAGNETE catalogs and technical brochures

Archived catalogs