The hand controlled magnetic lifter N > in the world > A T E N T N A L P A T I O E R N I N T yearsguarantee Safety Through Power size="-1">

Powerful, compact, safe, reliable The innovative technological concept and the superior performances has made MaxX becoming the absolute reference in the field of magnetic lifting of ferrous loads. and competitive are the key factors of the MaxX line success all over the world.MaxX lifters are the ideal solution for handling a large variety of work pieces, from flats to round, from finished to rough, with easy and ergonomic operation in total safety. The operating costs are near to zero, the efficiency and productivity are dramatically increase and the return of the investment is extremely quick.The...

Through a qualitative selection of top grade energy magnets and a further optimization of the tolerances between the stator and the rotor, has been possible to achieve a PlusӔ for the model MaxX 250 a MaxX 500.With the same size and weight these models will give 20% more performances thus being labelled MaxX 300 and MaxX 600 Energy versionӔ. > MaxX TG has been conceived to meet the demand for handling low thickness steel loads in a safe and efficient way.The special design of the polar surface together with a proper balancing of the magnetic masses located in the stator and in the rotor, allows...

The most practical, safe and economical way to handle ferrous loads. Hundreds of thousands of units already installed all over the world are the confirmation of the great value given in many industrial sectors, including: - tool and die makers- machinery builders - cutting and metal forming workshops - distribution centres of steel - shipyards - foundries and steel plants - steel construction and fabrication - warehousing and transportation and in general for the needs of allmodern industries, to enhance productivity for a sharp competitive edge. > A single operator can handle the load which...

The compact size allows the use MaxX 125 in very narrow spaces and with limited capacity hoisting system. An higher level of flexibility is given by the rotating hook being standard equipped. >

With the simple rotation of the lever the lifter is being activated and deactivated. During the MAG phase the lever is being firmly blocked by a mechanical safety device preventing any possible accidental deactivation. > The high-energy developed by the permanent magnets and the high concentration of magnetic flux generated exclusively in the polar area, without flux dispersions, enable the operator to notice when the clamping conditions are not optimal. In fact in this case the movement of the lever becomes irregular and quite difficult. The operator will be induced to seek for a more suitable...

The model MaxX 1000 and MaxX 2000 can be supplied with the new integrated and patented Auto Test System, ATS.The ATS device is able to check the force generated by the MaxX lifter on the specific load and then comparing it with the weight of the same determined by a load cell built into the lifting hook.Whenever the force generated by the lifter is not exceeding at least 2 time the weight of the load the ATS system gives a light and a sound signal to warn the operator to stop the undertaken handling operation.The digital display will show the relevant values in order the operator can get all...

Demag phaseMag phase > The MaxX series is born from an innovative design concept, the result of long and extensive experience of Tecnomagnete in the development and manufacturing of permanent electro magnetic systems for work holding and heavy duty lifting. The key elements of the MaxX lifter, i.e. the stator and the rotor, are manufactured with a solid block construction without any welding or assembling screws. This will grant high constant performances and an high level of durability and reliability over the time. Total Safety! In the activation (MAG) and deactivation (DEMAG) phases the rotor...

Safety Through Power > The mono-block construction has allowed to simplify the manufacturing process with less manpower input and with streamlined production flows. Dedicated high power magnetisation units have been developed to polarize the permanent magnets in a uniform way when the lifter is fully assembled for a perfect balancing of the magnetic flux. Project innovation, material selection, state of the art manufacturing process, powerful and reliable product with no maintenance need, convenience in price, have decreed the great international success making MaxX the most sold lifter all over...

SWL-Load (kg) Force (daN) Air gap (mm) minimum thickness 20 mm minimum thickness 45 mm minimum thickness 55 mm > SWL-Load (kg) Force (daN) Air gap (mm) minimum thickness 20 mm > AIR GAP (mm) minimum thickness 40 mm > SWL-Load (kg) Force (daN) SWL-Load (kg) Force (daN) Air gap (mm) Air gap (mm) minimum thickness 25 mm >

SWL-Load (kg) Force (daN) Model SWL-Load Thick Length max min. max kg mm mm Air gap (mm) minimum thickness 20 mm MaxX 125 125 20 1000 MaxX 250 250 20 1500 >

MaxX 1000 (3000 daN) > Force (daN) MaxX 600 E (1800 daN) MaxX 500 (1500 daN) MaxX 300 E (900 daN) MaxX 250 (750 daN) MaxX 125 (375 daN) > 0500100020001500250030003500 102030405060

Model MVS 250 MVS 500 MVS 1000 Load Max (kg) 180 350 700 Max length plate (mm) 800 1000 1000 Max height plate (mm) 550 700 800 >

Tecnomagnete: all the magnetism of the leader. > Here is a strong statement:Tecnomagnete has revolutionized the world of work holding! Do you want a stronger one? The QuadSystem!This permanent electro magnetic system generates a concentrated and predetermined force that is highly effective to clamp steel parts on machine tools, moulds for injection molding and dies for metal stamping machines, and the handling of ferrous loads. Weve believed in the force of our QuadSystem patent and manycompanies have believed in this powerful innovative technology. The large variety of applications of over 100,000...