Piezo Z-Stage P-737 Order Information for High-Resolution Sample Positioning Part No. P-737.1SL: 00-55-551-0000, 100 μm Part No. P-737.2SL: 00-55-550-0000, 250 μm Accessories High-speed Piezo Z-motion with travel ranges to 250 μm Nanometer resolution Clear aperture to accommodate specimen holders Sub-millisecond response times Controller E-665.SR (included in delivery) Part No.: 00-55-600-0800 Stage insert for one slide 3“ x 1“ Part No.: 00-55-500-1000 Stage insert for petri dish, Ø 36 mm Part No.: 00-55-500-1010 The piezo-actuatorbased P-737 moves the sample along For high stability and repeatability, P-737 stages are the optical axis to quickly and precisely adjust the focus, equipped with position sensors. High-resolution, absolu- while the XY stage positions the sample. Vertical te measuring strain gauge sensors (SGS) are applied to stepping with an accuracy in the nanometer range takes appropriate places on the drive train and feed the only a few milliseconds. The large aperture is designed to platform position information back to a piezoelectric accommodate a variety of specimen holders including controller. The sensors are connected in a full-bridge slides or multiwell plates. configuration to eliminate thermal drift, and assure optimal position stability and rapid response with nanometer resolution.

8,8 4,8 0,5 65 11 10,5 18 30 R 20,5 7 138 86,5 R5 M3 / 6 tief Erdungsbohrung eloxalfrei 0,9 5 R4 5x45° 12,5 160 30 140 124,5 148 90 220,5 1 128,5 156 156,6 R1 100 5 ,5 R5 R1 R8 A A 5 76 67,5 27,3 89,5 94 5 4 110 2m Piezo Z-stage P-737 for high-resolution sample positioning Specifications Motion and positioning Integrated sensor: Closed-loop travel: Closed-loop resolution: Open-loop resolution: Closed-loop linearity: Repeatability: Mechanical properties Unloaded resonant frequency Resonant frequency under load Push/pull force capacity in motion direction Load Drive properties Piezo ceramic type:...

Piezo Amplifier E-625.SR Servo-Controller with High-Speed RS-232 Interface Specifications E-625.SR Part-No. 00-55-600-0800 Models Function: Channels: Power amplifier & position servo-control of LVPZTs 1 Amplifier Output voltage: Maximum output power: Average output power: Peak output current: Average output current: Current limitation: Voltage gain: Polarity: Input Impedance: Dimensions: Mass: Operating voltage: Operating current: -20 to +120 V 11 W 6W <5 ms 140 mA 60 mA short-circuit proof 10 ±0.1 positive 100 kΩ 205 x 105 x 60 mm 1.050 g 12 to 30 VDC, stabilized 2A Interface D/A converter:...

Fixing Holes for Piezo Z-Stage P-737 For the adaptation of Piezo Z-stages onto inverted Märzhauser stages, the fixing holes marked on the top plate of the scanning stages are required. If these fixing holes are inexistent, please contact: Märzhäuser Wetzlar GmbH & Co. KG Customer Support eMail: [email protected] Tel.: +49 6441 9116-36