Pneumatic toggle presses
12Pages

Pneumatic toggle presses The accessories Pneumatic toggle presses APK*L and VKL range The optimum transmission ratio of the toggle lever produces large forces at the end of the stroke and ensures low air consumption. The resulting low energy consumption means that mäder pneumatic toggle presses are a cost-effective production tool, not only at the procurement stage but also in the long term. All pneumatic toggle presses can be provided with the standard mäder MPS-2 controller or with customer-specified controllers. Other quality features:  Factory pre-set pressure point  Right-angled gearbox for simple height adjustment of the press head  Side-mounted measuring strip for fast reproduction of settings when changing the tool  Practically maintenance-free double-acting cylinder  Low noise: less than 75 dB 0 kN Before end of stroke 5,0 mm 4,5 mm 4,0 mm 3,5 mm 3,0 mm 2,5 mm 2,0 mm 1,5 mm 1,0 mm 0,5 mm 0,0 mm vor Hubende Request CAD at www.maederpressen.de or directly from Tel.+49 (0) 74 67 - 94 67 - 0 E

Type Capacity at 6 bar Working stroke Throat Daylight Daylight with DP Table size T-slot width similar to DIN 650 Ram bore Ø x Depth Ram Ø Air connection Air consumption/cm cyl. stroke Space requirement Stand height Weight Please specify when ordering. DP DP Accessories (see Page 8) Precision ram adjustment Capacity at 6 bar Working stroke Throat Daylight Daylight with DP Table size T-slot width similar to DIN 650 Ram bore Ø x Depth Ram Ø Air connection Air consumption/cm cyl. stroke Space requirement Stand height Weight Accessories (see Page 8) Please specify when ordering. Precision ram...

XL-Pneumatic toggle presses The accessories Pneumatic toggle presses XL-APK*L and XL-VKL range Presses with XL throat are designed for processing large and bulky parts. The press stand consists of a stable welded structure which can be modified to suit customers‘ requirements. XL pneumatic toggle presses can be provided with the standard mäder MPS-2 controller or with customer-specified controllers. Other quality features:  Factory pre-set pressure point  Right-angled gearbox for simple height adjustment of the press head  Side-mounted measuring strip for fast reproduction of settings...

Capacity at 6 bar kN 24 Working stroke mm 40 Throat A mm 130 Throat C-frame H mm 300 Daylight B mm 130 - 280 Daylight C-frame BB mm 158 Table size CxD mm 200 x 220 T-slot width similar to DIN 650 mm 14 Ram bore Ø x Depth E mm 12H7 x 30 Ram Ø / Ram area F mm 30 Air connection G 3/8“ Air consumption/cm cyl. stroke l 1.05 Space requirement CxG mm 200 x 560 Stand height K mm 630 Weight kg ca. 149 Valve and service unit only included with controller. Design may vary. with square ram XL-VKL 3200-40-300 sesserp elggot citamuenPPneumatic toggle presses XL-APK Series with round ram 300 mm throat...

Slide tables mäder pneumatic and manual slide tables simplify manual and automatic insertion and therefore increase the economic efficiency of assembly processes. The advantages:  Insertion is carried out outside the danger area  Parts can be preassembled spatially unhindered by the press  Versatile options for automation and feed tasks  Precise positioning of workpieces Other quality features: Manual slide table Pneumatic slide table Hardened and ground guide columns Precision cross-roller guide with high loading capacity Slideway adjustable without play Installs transversely or...

Slide tables selbat edilSSlide tables Installation examples DA type press with PST 130 Installation from the front Type Stroke Load capacity Suitable for presses with throat Weight Installation from the side

Pneumatic rotary indexing table ST 250 Pneumatic rotary indexing plate • Ideal for presses up to 13 kN compressive force with centric force application to the integrated anvil • 12 mounting holes with fixing screws for workpiece carriers in the turntable • Maximum load per bore hole: 200 g • Pneumatic locking of the turntable in the working position • Direction of rotation: clockwise Type Mounting hole Installed height Indexing precision Operating pressure Example of application with pneumatic press Request CAD at www.maederpressen.de or directly from Tel.+49 (0) 74 67

Press controllers for pneumatic presses srellortnoc sserPPress controllers The controller model MPS-2 conforms to the safety requirements which must be applied according to the EC Machinery Directive 2006/42/EC and to the standards for the safety of pneumatic presses. MPS-2 two-hand controls fulfil all requirements of type IIIC according to DIN EN ISO 13851. mäder presses can therefore be used at workstations with manual loading and open tools. Safety is provided here by the controller, which is designed to be both electrically and pneumatically redundant. MPS-2 controls include a press...

TPC-MIDI Process monitoring Applications: Joining and assembly processes using presses must today be carried out safely and if possible without retrospective checking. Specified parameters which define the press process must be maintained during production. Only in this way can the quality and safety of the manufactured product be guaranteed. For this reason, TPC-MIDI is used wherever consistent joining processes are required, the progress of which has to be checked and if applicable documented by means of software. TPC-MIDI monitors the press operation, compares the actual progress with...

TPC-MIDI System structure TPC-MIDI control MPS 2 Two-hand safety control Start/stop Measurement Force/ displacement sensors gnirotinom ssecorPProcess monitoring TPC MIDI Evaluation unit Measurement programs Set/actual comparison OK/NOK assessment Press-in time Preselection NOK acknowledgement Counter functions External PC/network Save measurement programs Save equipment configuration Measured data memory Load cell force sensors for TPC-MIDI The load cell force sensor is fixed inside the ram bore. The tool holder can be fixed in the hole at the other end of the sensor. The force sensor is...