GTLAB Software Software for calculating CONDUCTANCE and TRANSMITTANCE The GTLAB program enables conductance and transmittance calculations by importing data measured with an heat flux meter. CONDUCTANCE The conductance calculation is carried out with the progressive averages method. By this method, the conductance is obtained not by using instantaneous values for temperature and heat flux, but by taking account of the values calculated on averages obtained from the total of the readings performed. TRANSMITTANCE The transmittance calculation is carried out by selecting the surface coefficients of heat exchange, which combine the effects of the above phenomena and are tabulated in UNI 7357/76 Regulations and subsequent adaptations according to the geometrical situation (e.g. vertical, horizontal structure, etc.), and in the UNI regulations accompanying Law 10/91 (e.g. in the UNI 10345 regulations for window elements). Methodologies Measure of thermal flow MAE s.r.l advanced geophysics instruments Zona Ind. Fresilia - 86095 Frosolone (IS)

Flasiftteniiflnpccfco__TemperatureSuperficiili [inijuttaftraistantanea llapilm llenjEslia MAE s.r.l advanced geophysics instruments Zona Ind. Fresilia - 86095 Frosolone (IS)