Temperature Sensors, Controllers & Accessories Madison Company has been incorporating temperature sensors into its level switch products for over 50 years. With this temperature sensor experience, a basic standard product line has been established to complement our capability to design and manufacture application-specific sensors. Madison’s temperature offerings include: • Thermocouples • RTDs (Resistance Temperature Detectors) • Madison-Omni® RTDs with integrated user-programmable controls • Bimetal Thermal Switches • Indicators and Controllers • Accessories for Temperature Sensors www.madisonco.com © Copyright Madison Company – 3/11

T Series Standard Temperature Sensors Thermocouples Bare-wire thermocouples. Sold in packages of 10 pieces. OVERALL LENGTH General-purpose thermocouples with fiberglass-insulated extension leads and various termination styles. SHEATH OD CALIBRATION TYPE SHEATH MATL. INSULATION MATERIAL JUNCTION TYPE WIRE SIZE OVERALL LENGTH (INCH) Strip lead Mini plug Full-size plug Strip lead Mini plug Full-size plug Strip lead Mini plug Full-size plug Strip lead Mini plug Full-size plug Strip lead Mini plug Full-size plug Strip lead Mini plug Full-size plug Strip lead Mini plug Full-size plug Strip lead Mini...

T Series Standard Temperature Sensors Thermocouples General-purpose epoxy-insulated thermocouples. SHEATH OD CALIB. TYPE SHEATH MATL. INSULATION MATERIAL JUNCTION TYPE OVERALL LENGTH WIRE SIZE PROCESS CONNECTION Thermocouples with reduced tip for improved response time. The probe comes with a nylon handle, cable strain relief and extension cable. Overall length listed below refers to probe only. SHEATH OD CALIBRATION TYPE SHEATH MATL. INSULATION MATERIAL JUNCTION TYPE CABLE LENGTH OVERALL LENGTH (INCH) Mini connector Mini connector Mini connector Mini connector Mini connector Mini connector Mini...

T Series Standard Temperature Sensors Thermocouples Thermocouples with mini plug termination. SHEATH OD CALIB. TYPE SHEATH MATL. INSULATION MATERIAL JUNCTION TYPE WIRE SIZE OVERALL LENGTH (INCH) Epoxy coated Epoxy coated Epoxy coated Epoxy coated Epoxy coated Epoxy coated Fiberglass jacket Fiberglass jacket Fiberglass jacket Fiberglass jacket Fiberglass jacket Fiberglass jacket Fiberglass jacket* Fiberglass jacket* Fiberglass jacket* Fiberglass jacket* Epoxy coated Epoxy coated Epoxy coated * High-temperature fiberglass jacket. Sheathed thermocouples with MgO insulation, grounded junction. Sold...

T Series Standard Temperature Sensors RTDs (Resistance Temperature Detectors) Industrial 100 ohm RTD probes, rigid mount. Process connection is 1/2” NPT with 1/2” conduit connection. PROBE LENGTH PROBE MATERIAL Aluminum J-box Aluminum J-box Aluminum J-box Aluminum J-box Plastic J-box Plastic J-box Plastic J-box Plastic J-box RTD probes with 48” Teflon®-jacketed cables terminated with spade terminals. PROBE LENGTH PROBE MATERIAL RTD probe style is closed tip. PROBE LENGTH PROBE MATERIAL Madison Company • (203) 488-4477 • (800) 466-5383 • Fax (203) 481-5036 • [email protected] • www.madisonco.com...

T Series Standard Temperature Sensors Madison-Omni® RTDs User-programmable indicator that provides range indication and offers two alarm settings. The platinum RTD sensor with a 316 stainless steel sheath has an analog 4-20 mA output signal and a supply voltage of 10-30 VDC. The electrical connection has an M 12x1 thread; if a mating connector is required, one of the accessory cables (listed below) should be ordered. The process connection is available with either a G 1/2 or a 1/2” NPT thread and meets IP67. PROBE LENGTH Madison-Omni ® RTD Sensor Accessories 029-P00001 – Shielded cable; 2m length...

Temperature Indicators and Controllers Temperature Indicators Base indicator with NO contact, programmable to NC for reverse action. Display has four process and four set points. Supply voltage is 100-240 VAC, 50/60 Hz. Features a universal input for thermocouple, RTD (2- or 3-wire), analog 0-50 V, 0-5 V, 0-10 V or 4-20 mA. Also includes a communications port for RS232 MODBUS. Additional module chips are available (specify indication model): Output: Input: – Relay Output – Thermocouple – RTD – SSR Output (15-18 VDC / 50 mA) – Transistor Output (24 VDC / 100 mA) – Volt/Current Output (0/4-20 mA,...

Temperature Sensor Accessories and Kits Accessories MODEL Thermocouple Extension Wires 011-P00003-J25 Plug style Plug style Plug style Jack style Jack style Jack style Plug style Plug style Plug style Jack style Jack style Jack style Miniature Connectors Full-Size Connectors Temperature Kits Madison Temperature Kits include a temperature sensor (RTD or choice of J or K Thermocouples) and either a basic temperature indicator or a full-featured controller. The kits contain all of the hardware that is necessary to measure temperature (Basic kits – TK-xBxxx) or measure temperature and control a process...

T Series Type K, J & T Thermocouples Madison Company’s T Series thermocouples are designed specifically for long life and reliability using wellestablished engineering techniques. They are intended for use in measuring environmental temperatures in industrial applications from engines and ovens to dishwashers and heaters. Madison Company’s engineers consider all aspects of the application including vibration, mechanical and thermal shock, time response, high temperature and other environmental extremes. The T Series Type K, J and T have a typical construction of grounded, ungrounded or exposed...

Junctions Three main styles of thermocouple junctions are available on T Series thermocouples: • Closed tip – specified when a pressure seal or protection from the atmosphere is desired. Can be made with an isolated junction or grounded junction. • Exposed junction – specified when IR radiation or contamination by-products are not a factor, or where fast response to temperature change is desired. • Shielded junction – used when it is necessary to reduce the effect of radiation on accuracy but still maintain a fast response time. Shielded Exposed Protecting Sheath Although maximum sensitivity...