Catalogs >
MadgeTech >
ETR101A

ETR101A
2Pages

Catalog excerpts

EXHAUST TEMPERATURE SYSTEM Features • 10 Year Battery Life • 1 Second Reading Rate • Multiple Start/Stop Function • Ultra High Speed Download • 500,000 Reading Storage Capacity • Memory Wrap • Battery Life Indicator • Optional Password Protection • Programmable High and Low Alarms • Field Upgradeable Benefits • Simple Setup and Installation • Minimal Long-Term Maintenance • Long-Term Field Deployment The ETR101A is an Exhaust Temperature Profiling Kit designed to profile the exhaust temperature of on-road vehicles and off-road equipment, including tractor trailers, buses, trucks over 14,000 lbs., waste water vehicles, and sweepers. The ETR101A comes assembled and includes a data logger, temperature sensor (thermocouple type K), weatherproof enclosure, interface cable, hex screwdriver and software. A ¼” NPT coupler and a compression fitting is required for assembling, but not included. Setup is fast and easy. The ¼” NPT coupler is attached to the exhaust pipe; the use of a compression fitting allows for the thermocouple to be placed directly in the exhaust stream, providing for highly accurate profiling. The data logger, which is contained within the weatherproof enclosure, is then mounted to the vehicle. Applications • Profile exhaust temperature of on-road vehicles and off-road equipment Using the MadgeTech software, the logger is programmed to record for a set period, generally three to five days. Data is stored in the data logger, and is downloadable at any time via a pc or laptop computer. The complete temperature profile is then provided to the diesel particulate filter (DPF) manufacturer, aiding in the selection of the correct DPF for the exhaust system. Many DPF manufacturers, including Donaldson Corp., recommend the use of temperature profiling equipment, such as the MadgeTech ETR101A, to aid in the selection of the appropriate diesel particulate filter. MADGETECH DATA LOGGER SOFTWARE A Software Features: Full time zone support Data annotation Min./Max./Average lines Data table view Automatic report generation Summary view 6 Warner Road · Warner, NH 03278 Phone: (603) 456-2011 · Fax: (603) 456-2012 Mean Kinetic Temperature Digital calibration Multiple graph overlay

Open the catalog to page 1

**Use of stainless steel braided thermocouples with the Waterbox101A may allow water to wick in through the cable and cause damage to the data logger. ±1 minute/month ime ccuracy: (at 20°C, stand alone data logging) High and Low limits may be set for the thermocouple channel. Once data meets or exceed sets limits, the device will record to memory. Bi-level start and Triqqer Settinqs: stop triggers can also be programmed. Users can specify the number of readings to take after the device triggers. Green LED blinks: 10 second rate to indicate logging 15 second rate to indicate delay start mode...

Open the catalog to page 2

ETR101A 2Pages

Catalog excerpts

All MadgeTech catalogs and technical brochures

ETR101A
2Pages