1. Catalogs
  2. MADE
  3. General catalogue

General catalogue

General catalogue
1 / 48 PagesView full catalog

General catalogue

Product catalog summary
Company Overview
MADE S.A. is a French company founded in 1991, specializing in the design, development, manufacturing, and maintenance of professional electronic tools. The company is headquartered near Toulon, France, and has expertise in analog and digital electronics, signal processing, and mechanical integration.
Business Activities
MADE S.A. focuses on three main areas: electrical operating tools, buried cables and pipes locators, and power lines detectors. The company invests 15% of its annual turnover in research and development to foster innovation and enhance the safety and productivity of field operators.
Market Presence
In France, 80% of MADE's activities involve key power, gas, and telecom utilities, contractors, and military projects. Internationally, the company collaborates with over 30 distributors.
Product Overview
  • JUPITER+: A system for cable and phase identification, enhancing performance on impregnated paper cables.
  • Test Suitcase for Pre-Identifier: Simulates cable conditions for pre-identification and annual control of voltage-free devices.
  • DRN5: A test case for broken neutral in low-voltage networks with automatic load cycles and thermal protections.
  • LCI-400: Identifies live low-voltage cables and cores, improving safety and efficiency.
  • m.PAD and m.PAD-DS: Indicators for phase and feeder in live low-voltage networks.
  • TRIPHASOR: Measures grid characteristics and identifies phases to optimize electrical distribution networks.
  • TESTRANSFO2: Tests MV/LV transformers through a sequence of tests.
  • CF200: A MV fuse tester measuring fuse resistance with temperature compensation.
  • MULTI-Flex+: A digital multimeter with a flexible Rogowski coil for measuring voltage, current, and calculating active power and Cos Phi.
Technical Specifications
Key specifications include sampling RMS values with 600 ms integration, accuracy ranging from 0.3% to 5% depending on signal frequency, and operational temperature range from -20°C to 50°C. The devices are powered by a 9 V battery with an approximate life of 8 hours and have an IP55 rating.
Gas Tracker 2
This device locates and identifies buried plastic gas pipes using a transmitter to send signals through gas, creating ground vibrations. It features a strong design, military connection, and high visibility screen, with a battery autonomy of 4 hours and an IP63 rating.
Frequently Asked Questions
The Gas Tracker 2 offers high accuracy in Pin-Pointing mode, works well with radar technologies, and is safe near gas meter boxes. It is weatherproof with a maximum distance of up to 500 meters depending on soil compaction.
Cable Avoidance Tools - DD120
Features automatic pinpointing, multiple modes, and depth detection up to 3 meters with an IP54 rating and a 1-year warranty.
MRT-700
Locates underground cables and pipes with 7 sensors, a 2D LCD display, and high accuracy. It supports multiple tracing frequencies and has a Bluetooth connection with an IP54 rating and a 2-year warranty.
Power Line Detectors
These devices detect proximity to overhead MV-HV power lines, providing audible and visual alerts. They feature adjustable detection thresholds, IP65 rating, and are suitable for various vehicles.
High Voltage Line Detectors
SKY NG RADIO and DETECT LINE NG are designed to warn users of potential dangers near high voltage lines using acoustic and visual signals. They operate on 24 VDC or 12 VDC power, are IP65 waterproof, and function in temperatures from -20°C to +60°C.
Conclusion
MADE S.A. provides a range of innovative products designed to enhance safety and efficiency in the field, with a strong focus on research and development to maintain their competitive edge in the market.
See more

Catalog excerpts

General catalogue-1

CATALOGUE NETWORK EXPERTISE

 Open the catalog to page 1
General catalogue-2

Dear customers, MADE S.A. is a French company founded in 1991 ; the Headquarter is based near Toulon in the south east of France. We are specializing in the design, development, manufacture, and maintenance of innovative solutions for professional electronics tools. We have a particular know-how in analog and digital electronics, Signal Processing, and electronics devices with a mechanical integration (CAD). Our skills associated with our research and development department have allowed us to win national and international projects, in cooperation with R&D centers such as the power & gas utilities...

 Open the catalog to page 2
General catalogue-5

ELECTRIC OPERATING • Test suitcase for pre-identifier p. 5

 Open the catalog to page 5
General catalogue-6

ELECTRIC OPERATING l JUPITER+ Cable and phase identification system Pre-identify low and medium-voltage off line cables and feeders  Simplified ergonomics : continuity and phases identifying in open circuit mode are realized in a single handling  Single sensor for pre-identifying whatever the cable type  Enhanced performances on impregnated paper cables identifying  Storage of accessories and suitcase volume improved  Transmitter battery can be charged when suitcase is closed  Embedded self-diagnosis functions JUPITER+ allows :  Pre-identifying of cables  Pre-identifying of phases in...

 Open the catalog to page 6
General catalogue-7

ELECTRIC OPERATING • Test case for pre-identifier Control yourself your off line pre-identification devices The test case for pre-identifier allows you to do the annual control of your voltage-free devices of pre-identification LV/MV yourself. The test suitcase is compatible with any types of voltage-free device of pre-identification (ex : JUPITER, JUPITER +, FC2000, FC2300, FC2310, etc.). O USE PRINCIPLE The test case simulates a cable insulated with paper as well as a synthetic three-phase cable of 8 km in a situation of pre-identification, to allow you the execution step by step of the usual...

 Open the catalog to page 7
General catalogue-8

ELECTRIC OPERATING l DRN5 : Broken neutral test case Locate and fix a broken neutral on a low voltage network  FUNCTIONS DRN5 is a load accessory for low-voltage network under voltage, aimed at helping operators in their research, localization and fixing of broken neutral. DRN5 is in the form of an unbalanced load three-phase suitcase 5 kW, secured electrically and thermally. It can be used on any access point of the low-voltage network under voltage, after disconnection of subscribers, and it allows to quickly highlight the existence of a broken neutral or not. DRN5 is also used to check after...

 Open the catalog to page 8
General catalogue-9

ELECTRIC OPERATING Live LV cable and core identification  Identifies cables and cores  Gives phase rotation  Live LV  Simple to use  Visual and audible signal  Improves efficiency  Enhanced safety It is used to identify a live 115/220/ 400 V cable on which it is intended to work, and one or more of the cores in it. By correctly identifying LV cables, it reduces the risk of inadvertently opening an HV cable. The LCI-400 is considerably reduced in size and weight and simpler to use than the NADIR. The system transmitter is connected downstream of the point of interest to draw a complex current...

 Open the catalog to page 9
General catalogue-10

ELECTRIC OPERATING Phase and feeder on line controller m.PAD is a phase and feeder indicator specifying on which phase and on which feeder a customer is connected on a live low voltage network, downstream of a transformer substation. It is a robust, reliable, and user friendly system. m-PAD is composed of a transmitter and a receiver. The transmitter is connected at the transformer substation :  On the low voltage side to the three phases and neutral.  On each feeder with a Made-Flex current coil (including the three phases and excluding the neutral). The receiver can then be connected between...

 Open the catalog to page 10
General catalogue-11

ELECTRIC OPERATING Phase and feeder on line controller m.PAD-DS is a phase and feeder indicator specifying on which phase and on which feeder a customer is connected on a live low voltage network, downstream of a transformer substation. It is a robust, reliable, and user friendly system. m.PAD-DS is the evolution of m.PAD : thanks to its new software, it now accommodates various network topologies as STAR, DELTA, 50 Hz or 60 Hz. m-PAD-DS is composed of a transmitter (Central Device) and a receiver (Line Device). The CD is connected at the transformer substation :  On the low voltage side to...

 Open the catalog to page 11
General catalogue-12

ELECTRIC OPERATING Identify phases, balance and optimize the electrical network TRIPHASOR is an instrument for optimizing the operation of electrical distribution networks. It measure the electric grid characteristics in real time, and enable the identification of each phase on a phased network. TRIPHASOR is used on live low tension networks, under load. Triphasor consists of a transmitter and a receiver, both can be used on a live LV electric network. The transmitter must be connected in a substation using the voltage LV cords and the current Rogowski clamps. The receiver allows phase identifying...

 Open the catalog to page 12
General catalogue-13

Test your MV/LV transformers ELECTRIC OPERATING TESTRANSFO2 is a small, self-powered, hand-held device which is used to check the functionality of a tri-phased transformer disconnected from the network. Usable on all distribution transformers, it automatically performs a sequence of tests taking only two minutes to confirm whether the transformer is functional or not. TESTRANSFO2 automatically checks 19 critical points of your transformer to prevent any possible default before installation. These tests include :  Wiring continuity (open-circuit, short-circuit)  Transformation ratio of the three...

 Open the catalog to page 13
General catalogue-14

ELECTRIC OPERATING • CF200 MV fuse tester O BASIC OPERATION The MADE fuse tester performs a measurement of the fuse resistance. This measurement is based on the 4 wire measurement method with automatic compensation of the temperature effect on the result. The fuse tester consists of a rigid case, including : S An operating panel S Two measuring clamps S A self-test system S A temperature sensor The fuse test is performed in 4 steps : S Power on (with automatic self-test) S Connection of the 2 measuring clamps to the fuse S Selection of the fuse type from a selection menu S Measurement of the...

 Open the catalog to page 14

All MADE catalogs and technical brochures

  1. SKY RADIO 2

    4  Pages

  2. GAS TRACKER

    4  Pages

  3. JUPITER

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.