Mactech Europe LTD On Site Machining Services Flange Facing Mactech Europe has a range of both internally and externally mounted flange facing machines that cover most applications. Our equipment is capable of maintaining high degrees of accuracy with a variable feed rate to achieve the specified surface finish for all gasket types. All the machines are pneumatically driven and highly portable, designed to work in the most demanding of conditions. Some typical applications are as follows: Raised face flanges Ring Type Joints Specialist hub connectors Heat exchanger tube sheets front & back face ‘O’ Ring Grooves Pipe Cutting / End Prepping With light weight / low clearance clamshell machines covering pipe sizes from 2” – 60” outside diameter it is possible to cut and bevel a vast range of pipe sizes, materials and wall thicknesses in the minimum amount of time. Machines can be either pneumatically or hydraulically operated dependant on the application and site conditions. Internally mounted end preparation machines are also used from bore sizes ½” – 24”.

Mactech Europe LTD On Site Machining Services Line Boring Using Mactech Europe’s range of line boring equipment almost all applications can be completed no matter how large or small. The equipment is either pneumatically, hydraulically or electrically operated. The equipment is quick and easy to set up to the datums provided and will help keep your production down time, to a minimum. Milling With milling machines available to cover typical applications such as motor / pump bed plates, division plates and grooves exchangers, fin fans and keyway slots etc. High tolerances and rapid metal removal...

Mactech Europe LTD On Site Machining Services Journal Turning Before After To avoid costly and lengthy down time Mactech Europe have a range of pneumatically driven journal turning equipment which will achieve a high degree of accuracy and surface finish. Once machined the journals can be sleeved back to the original size or compensated with an oversize bearing. Specialist Applications Mactech Europe have the facility to design any piece of on site machining equipment to suit any specialist application by building a completely unique machine or by modifying an existing piece of equipment. Please...