Mactech Mini Flange FacerFacing Machines Internally Mounted Flange Mactech Europe LTD Mactech Mini Flange Facer A Compact Tool For Resurfacing Flanges Mactech’s compact and reliable Mini Flange Facer is an easy-to-use portable ange facer for resurfacing pipe and tube anges, with no special training required. The Mini Flange Facer rigidly mounts to the inside diameter of the pipe for stable and accurate machining. The self-centreing draw rod makes installation quick and easy. This amazingly powerful and versatile tool cuts through the toughest material, and works on a wide range of face diameters. Cutter blades machine smoothly, without requiring cutting uids. The Mini Flange Facer produces a clean, continuous chip, and squares off the end of the pipe. For resurfacing pipe and tube anges, Mactech’s Mini Flange Facer is the solution. Key Features 2 to 15 inch diameter ange facing capability. 1.25 to 6.42 inch inside diameter mounting range. Quick and easy set-up. Torque and chatter-free operation. Lightweight Self-centreing draw rod assembly. No special training required. Mactech Europe Limited Unit 7, Scragg House, Langley Business Park, Langley Rd, Langley, Macclesfield, Cheshire, SK11 0DG Tel: 01625 503 306 Fax: 01625 618 147 Email: [email protected] www.on-site-machining.co.uk

Mactech Europe LTD Set-up Time: A trained operator can set up the MT Mini Flange Facer on unobstructed pipe end or ange in 15 minutes or less. Pipe Mounting Diameter: Nominal pipe inside diameter mounting range: 1.25” - 10” (31.8mm - 254mm) For pipe I.D. ranges of 1.25” - 1.925” (31.8mm - 48.9mm) an extended range mandrel assembly is provided with the machine. Drive System: Motor: 1-1/4 HP (.9325 kw) Air Pressure: 90 psi (6.2 bar) Air Volume: 40 cfm (1,133 lpm) Speed: 34 rpm Radial Feed System: The radial feed system uses a 6-point star wheel which indexes the tool bit .007” (0.2mm) per tripper...