Mactech Europe LTD Mactech 814LC Single Point Accessory 814CL Single Point Accessory Easy Setup and Operation Single Point Facing and Bevelling Mactech’s 814LC Single Point Accessory adds facing and beveling capabilities to our popular 814LC Clamshell Lathe. The quick and easy setup gets your single point machining completed in a timely and cost-effective manner. The auto-feed function makes for effortless operation with minimal training. An adjustable angle tool holder allows end prep beveling of single and compound angles. Counterbores, grooves and facing are all possible with this versatile tool. With one setup it’s possible to sever and square with the Clamshell Lathe, and nish the end prep with the Single Point Accessory. No special tooling is required, the Single Point Accessory accepts standard 1/2 inch tooling. Contact Mactech today for the solution to all your single point machining needs. 814LC Clamshell Lather with single Point Accessory Adjustable Angle Tool Holder Key Features Include: Easy Setup Ideal for heavy wall end prep Auto-feed mechanism Adjustable angle tool holder Uses standard ½inch tooling Facing, beveling, compound angle beveling, ring grove and counterboring capabilities Mactech Europe Limited Unit 7, Scragg House, Langley Business Park, Langley Rd, Langley, Macclesfield, Cheshire, SK11 0DG Tel: 01625 503 306 Fax: 01625 618 147 Email: [email protected] www.on-site-machining.co.uk

814CL Single Point Accessory Mactech Europe LTD Mactech Europe Limited Unit 7, Scragg House, Langley Business Park, Langley Rd, Langley, Macclesfield, Cheshire, SK11 0DG Tel: 01625 503 306 Fax: 01625 618 147 Email: [email protected] www.on-site-machining.co.uk