Internally Mounted Flange Facing Machines Mactech Europe LTD MTF48120 FLANGE FACING MACHINE A modular portable machine for flange facing, grooving and weld preparation. The Mactech MTF48120 is designed to machine full faced, raised face and grooved flanges having a minimum bore of 48” (1219mm) and a maximum outside diameter of 120” (3,048mm). Mactech MTF 48120 Flange Facer is constructed from the highest quality materials. It is designed to give machine shop accuracy combined with portability and ease of handling for the on-site machining of flanges from 48” to 120” (1219mm to 3,048mm). The machine consists of four main modules: 1. The Mounting Base is an eight-ram radial clamping chuck. Adjustable clamping jaws on four of the rams are adjusted by an integral rack and pinion arrangement, operating in a similar fashion to a conventional four-jaw chuck. Sectional box lengths bolt together for the appropriate I.D. arrangement. Mactech Europe Limited Unit 11, Fence Avenue Industrial Estate, Macclesfield, Cheshire, SK10 1LT Tel: 01625 503 306 Fax: 01625 618 147 Email: [email protected] www.on-site-machining.co.uk

Internally Mounted Flange Facing Machines Mactech Europe LTD Features Modular construction I.D. and O.D. mounting Toolpost Operates in any position Cuts all flange types Multiple surface finishes Feed Gearbox 2. The Turntable provides a rigid support for the slide arm and incorporates two pneumatic motors and a right angle feed gearbox. It bolts directly to the base after the base model has been levelled and radially positioned. Using the two pneumatic motors enables the torque to be evened out and also acts as a backlash eliminator. Air input to the motor units is via the centre hub manifold....