*mydirectindustry

Catalogs
Mactech Europe Ltd
Mactech MTF012 Flange Facing Machine

Mactech MTF012 Flange Facing Machine

Product catalog summary

Overview: The document describes the MTF012 Flange Facing Machine by Mactech Europe LTD, a lightweight and portable machine designed for flange facing, groove machining, and welding preparation. It is applicable to smooth flanges and those with sealing strips or tongue and groove, with diameters ranging from 0 mm to 305 mm (0” to 12”).

Specifications:

Compact and lightweight design with internal clamping.
Operates in any position and creates various groove types including 'O' ring grooves, vertical grooves, 'V' grooves, lens seats, and welding preparations.
Surface roughness achieved: Ra 1.6 µm to 6.3 µm for turning, Ra 0.8 µm to 1.6 µm for polishing.
Pneumatic drive allows use in hazardous environments.
Comes with a transport box.

Technical Data:

Main dimensions: Height 130 mm, Turning diameter 305 mm, Stroke of tool holder 438 mm, Overall diameter 610 mm.
Weight: Net weight 50 kg, Transport weight 85 kg.
Wooden box dimensions: Length 800 mm, Height 430 mm, Width 720 mm.
Mounting range: Min. 102 mm, Max. 305 mm.
Machining range: Min. 0 mm, Max. 305 mm.
Drive motor: 0.66 kW (0.85 HP).
Minimum air pressure requirements: 5 bar, 2.26 m³/min.
Drive motor speed: 1600 rpm, Max. speed 33 rpm.

Feed Table:

In: 0.81 mm (0.032 inches)
Out: 0.20 mm (0.008 inches)
Handheld: 0.5 mm (0.002 inches)

Machine Components:

Base Ring: Adjustable clamping blocks attach to the base ring to fit the flange size.
Drive and Bearing Unit: Equipped with a 0.66 kW pneumatic motor mounted directly on the drive and bearing unit.
Saddle: Mounted on the drive and bearing unit, providing a rigid structure for the tool holder. The drive is via internal gearing and gears in the saddle. The cross movement of the tool holder is driven by a threaded rod powered by gears in the saddle, with direction selected by a switch.

Capabilities: The machine can cut up to 2 mm deep in flanges without holes and up to 1 mm in flanges with holes.

Catalog excerpts

Innenspannende Flanscdrehmaschinen Die leichte, portable, Maschine zur Plandrehen der Flansche, zur Bearbeitung der Nuten, Vorbereitung zum Schweißen. Anwendbar an glatten Flanschen sowie Flanschen mit Dichtleiste oder Nut / Feder mit Diameter von 0 mm-305 mm (0”-12”). ypische Anwendungen Mit Zubehör… Drehen der “V” Nuten VERTRETUNG FÜR DEUTSCHLAND L-Plan Service GmbH & Co KG Marienstr. 62 Tel: +49 2403 555 464 60 Fax: +49 2403 555 464 66 e-Mail: [email protected] www.lplan-service.com

Open the catalog to page 1

Getriebe AntriebsEinheit kompakt, leicht innenspannend Betrieb in jeder Lage erzeugt “O” Ring Nuten, vertikale Nuten, “V” Nuten, Linsensitze, und Schweißvorbereitungen Erreicht die Oberflächenrauhigkeiten Ra 1,6 µm 6,3 µm (63CLA to 250CLA) bei Drehen resp. Ra 0,8 µm bis 1,6µm (32CLA to 63CLA) bei Polieren ‘Gramophon’ Fläche Pneumatischer Antrieb erlaubt die Anwendung in gefährlichen Umgebungen mit Transport-Box Mactech MTF012, wie die anderen Maschinen dieser Baureihe wird aus hochwertigen Werkstoffen gefertigt. Sie kombiniert die Präzision einer Werkstattmaschine mit einfacher Bedienung, und...

Open the catalog to page 2

All Mactech Europe Ltd catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list