Mactech Clamshell Axial Feed Accessory Extend the Versatility of your Clamshell Lathe! Clamshell Axial Feed Accessory Mactech’s Axial Feed Accessory is an attachment for our popular and reliable Clamshell Portable Lathes.The Axial Feed Accessory is designed for machining along the length of round pipes, tubes or shafts. The optional backing plate adds rigidity and provides precise positioning on the workpiece. The Axial Feed Accessory is ideally suited for removing weld overlay and can also perform precise machining operations.The Axial Feed Accessory can be installed on all Mactech LC, US and USS Clamshell Lathes. Axial Feed Accessory Machining Pipe 814LC Clamshell with Axial Feed Accessory Tripper Assembly Weight: 18.2 lbs (8.3kg) Tooling: Accepts standard 1/2 inch tooling (12.7mm) Clamshell Lathe Backing Ring with Jacking Bocks Axial Feed Accessory Axial Feed Accessory and Backing Ring Mactech Europe Limited Unit 7, Scragg House, Langley Business Park, Langley Rd, Langley, Macclesfield, Cheshire, SK11 0DG Tel: 01625 503 306 Fax: 01625 618 147 Email: [email protected] www.on-site-machining.co.uk

Tool Holder 10.63 (270mm) 6.54 (166mm) Travel 4.51 (114.3mm) 6.49 (164.8mm) Axial Feed Accessory Dimensions Mactech Europe Limited Unit 7, Scragg House, Langley Business Park, Langley Rd, Langley, Macclesfield, Cheshire, SK11 0DG Tel: 01625 503 306 Fax: 01625 618 147 Email: [email protected] www.on-site-machining.co.uk Clamshell Axial Feed Accessory ½” Tooling 12.7mm