Catalogs >
Mactech Europe Ltd >
Mactech_EPL_Accessories

Mactech_EPL_Accessories
2Pages

Catalog excerpts

Mactech Europe Ltd Speciality End Prep Electrically or pneumatically powered for standard or speciality applications ‘Electric Wart’ EPL Interchangeable with the pneumatic motor, the ‘Wart’ gear head can easily convert from Air Driven to Electrically Powered in a matter of minutes, and requires no special tools or training. Easily turned “on” and “off”, the powerful variable speed, 1400 watt, double-insulated motor and proprietary speed reduction spider combine to develop maximum cutting force at the blade, producing a thick chip and preventing work hardening without using a cutting lubricant. ‘Z Wart’ End Prep Tool Electrically or pneumatically powered for standard specialty applications The ‘Z Wart’ is a powerful narrow body specialty end prep tool for applications when tool width is critical and torque needs to be maximised. A slender 2-5/8” wide, the ‘Z Wart’ adds an additional right angle drive into the conventional Mactech Wart EPL drive train that reduces the RPM by half and doubles the torque at the cutting blade. The low RPM and high torque of the ‘Z Wart’ make it well suited for end prep applications that include tube stub removal and weld overlay. ‘Short Perch Wart’ Accommodating elbows and tees up to 3-1/2”, the ‘Short Perch Wart’ is capable of providing any angle of end prep on pipe fittings up to 31/2” OD while requiring only 3/8” of straight pipe to clamp. Existing Mactech Wart EPLs can easily be fitted to accept the ‘Short Perch Mandrel’. ‘Contour Wart’ The ‘Contour Wart’ or ‘Fish Mouth’ , is a specialty end prep tool for profiling tube ends so they sit evenly on the radius of a header, and allows for full penetration welds. The profile shape of the end prep is specific to the application and is ideal when a large number of end preps of consistent size need to be profiled. Mactech Europe Limited Unit 7, Scragg House, Langley Business Park, Langley Rd, Langley, Macclesfield, Cheshire, SK11 0DG Tel: 01625 503 306 Fax: 01625 618 147 Email: info@mactecheurope.co.uk www.on-site-machining.co.uk

Open the catalog to page 1

Mactech Europe Ltd Mactech Air Clamp ID Clamping End Prep Tool Ideal for Tube Fabrication Facilities Built for Production Built for production, the ‘Air Clamp’ series Mactech EPLs are ideal for tube fabrication shops that do large numbers of end preps on tube and pipe of a consistent size. Operators will like the quick action of the ‘Air Clamp’. This simple innovation is easy to use, increases production and minimizes operator fatigue by eliminating the tedious and time-consuming task of manual clamping. Production Increases Over 300% The Mactech ‘Air Clamp’ is designed for shop use when...

Open the catalog to page 2

Mactech_EPL_Accessories 2Pages

Catalog excerpts

All Mactech Europe Ltd catalogs and technical brochures

Mactech_EPL_Accessories
2Pages