Mactech Europe LTD Mactech Commander EPL ID Clamping End Prep Tool (model C-314) 3.75” (88.9mm) ID to 14” (355.6mm) OD Built for Performance The Mactech Commander EPL is one of the new breed of end prep tools developed for end prepping all schedules of pipe from 3.75” ID to 14” OD. The C-314 features a state of the art ID clamping system that spreads the contact points of the clamps radially inside the ID of the pipe and minimizes vibration for chatter free end preps on both thin and heavy wall pipe. Stable, smooth rotation of the cutter head on all schedules and sizes of pipe to 14” OD is accomplished with dual opposed tapered roller bearings that are easily adjusted when ID Clamping End Prep Tool (model C-314) 3.75” (88. 9mm).ID to 14” (355.6mm) OD necessary, and never wear out. Only seven sets of clamps to cover entire range One mandrel covers entire range Ultra-stable clamp ribs and pads secure to pipe ID for chatter-free end preps on thin and heavy wall pipe Portable, pneumatically-powered end prep tool Pneumatic motor that develops over 2,000ft lbs of torque at the cutting bit and optional Right Angle Drive doubles torque Right Angle Drive is interchangeable with the Mactech Dictator EPL Ultra-rugged gear and dual opposed tapered bearing set-up delivers a low-maintenance tool designed for years of trouble-free service In Action Powerful and versatile, the torque at the cutting blade for the C-314 can be doubled with the addition of the torque multiplying Right Angle Drive. This drive bolts on easily and lets you mount the motor in numerous different positions. Mactech Europe Limited Unit 7, Scragg House, Langley Business Park, Langley Rd, Langley, Macclesfield, Cheshire, SK11 0DG Tel: 01625 503 306 Fax: 01625 618 147 Email: [email protected] www.on-site-machining.co.uk Email: [email protected] www.on-site-machining.co.uk

Mactech Europe LTD Mactech Commander EPL Clamp Rib and Pad Selector Item Clamp rib set Clamp rib set Clamp rib set Clamp rib set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set Clamp rib & pad set 3.750” (95.25 mm) ID to 14” (355.6 mm) OD 3 hp (2.237 kw) 90 psi (6.2 bar) 95 cfm (2690 It/min) 16 RPM 12.750” (323.9 mm) 19.750” (501.7 mm) 12” (305 mm) with right angle drive 85 lbs (38.5 kg) 200 lbs (91 kg) 32” x 15” x 17” (813 mm x 381 mm x 432 mm) *Manufacturer reserves...