NEW PRODUCT SELL SHEET 240V ELECTRIC OIL PUMPS 2 YEARS MACNAUGHT WARRANTY* Macnaught's range of Oil handling equipment has been enhanced by the addition of new 240V Electric Oil Pumps for a flexible alternative to traditional Manual and pneumatic oil pumps. The Electric Oil Pump heads are constructed from robust cast iron with sintered steel impeller, Viton seal and POM (polyoxymethylene) vanes to reduce wear and maximise the operational life of the unit. The pumps are rated to IP55 and have 240V single phase motors with a 30 minute duty cycle, supplied with 2m cable complete with standard 3 pin plug and built in on/off switch. Available in two models with flow rates from 25lpm and 50lpm, the EOP25-240V and EOL50-240V are suitable for oils and diesel fuel with viscosity up to 500cSt @ 40deg C. Producing up to 100psi of head pressure and offering up to 2m of suction head, the new Electric Oil Pumps from Macnaught are built tough for most oil and diesel transfer applications. Corrosion resistant powder coating enables oil pumps to thrive in harsh applications TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION PACKAGE INCLUDES P/N: EOP25-240V P/N: EOP50-240V Pump Unit Free Flow Rate: 25l/m Free Flow Rate: 50l/m Owner's Manual Duty Cycle: 30min Duty Cycle: 30min Inlet: 1” BSPF Inlet: 1” BSPF m macnaught Built to last since 1948. Macnaught Pty Ltd 41-49 Henderson St, Turrella NSW 2205. Australia Ph: +61 2 9567 0401 Fax: +61 2 9597 7773 Email: [email protected] Website: macnaught.com *For Macnaught warranty, terms and conditions see macnaught.com/warranty ©Macnaught Pty Ltd, 2021 Innovation. The only way to stay ahead.