MLT056V50-AV5
23Pages

MACLIGHT DISPLAY CO., LIMITED SPECIFICATION FOR LCD MODULE Part No.: Customer No.: Spec Version: Issued Date: Customer approval: ※Please pay more attention for the “inspection standard”, we assume you already agree this standard when place an order with us. ※The specification of “TBD” should refer to the measured value of sample . Maclight Display Co. Ltd www. szmaclight.com Ema

MACLIGHT DISPLAY CO., LIMITED Documents Revision History: Rivision Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

MACLIGHT DISPLAY CO., LIMITED 1. General Description   The MLT056V50-AV5 model is a Color TFT LCD supplied by Maclight Display Co Ltd. This main Module is has a 5.6 inch diagonally measured active display area with 640(RGB)X480 resolution with A/D board, including --5.6” TFT LCD module --A/D board One channel Video/VGA signal input optional. Brightness, color depth, contrast adjustment NTSC / PAL System automatic identifying and converting Single Operation Voltage +12.0V (Min9.0V, Max15.0V) The external potentiometer adjusts the brightness and color RoHS compliant 2. General Specification...

MACLIGHT DISPLAY CO., LIMITED 3. Optical Specific Item Viewing Angle (Ф=0° or 180°) Contrast Ratio Response Time Electro-optical characteristics test method: Maclight Display Co. Ltd www. szmaclight.com Email:

MACLIGHT DISPLAY CO., LIMITED Definition of contrast ratio “White state “:The state is that the LCD should driven by Vwhite. “Black state”: The state is that the LCD should driven by Vblack. Vwhite: To be determined Vblack: To be determined. Definition of Response Time: The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from10% to 90%. Definition of color...

MACLIGHT DISPLAY CO., LIMITED Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the center of each measuring area. Luminance Uniformity(U) = Lmin/ Lmax L-------Active area length W----- Active area width Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

Note: 1. DISPLAY TYPE: 5.7 TFT,TRANSMISSIVE 2. VIEWING DIRECTION : U/L/D/R 80/80/80/80 3. TFT Driver IC : JD9168S 4. Top : -20° ~ 70°, Tst : -30° ~ 80 5. LCM Luminance:LED/450cd/m2 (Typical) 6. Modify the marker, with * accent size, with ( ) as the reference size eneral tolerance±0.2 7. Meets RoHS standards Under the down frame MACLIGHT DISPLAY CO., LIMITED 4. Mechanical Diagram LCD drawing (P/N:MLT056V50-5): Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

MACLIGHT DISPLAY CO., LIMITED A/D Board Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

MACLIGHT DISPLAY CO., LIMITED Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

MACLIGHT DISPLAY CO., LIMITED 5. Interface Pin Connections J1 is for the socket (6P/2.0mm pitch ) to connect power and video pin function connection Video input video ground J2 is for the socket (6P/2.0mm pitch ) to adjust the external potentiometer pin Function description remark 1 [Remark 1] Be bright a the high potential and be dark at low potential [Remark 2] Be thick at high potential and be thin at low potential Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

MACLIGHT DISPLAY CO., LIMITED J3 is the socket(6P/2.omm pitch ) to connect VGA lead.(if in Video mode, VGA is NC, if in VGA mode, the connector would be available). pin Function description remark 1 Blue input Green input Horizontal synchronization Vertical synchronization Power on/off AV/VGA convert CN1 is socket leads (50P/0.5mm pitch ) to connect the LCD modules. Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

MACLIGHT DISPLAY CO., LIMITED Pin No. Frame sync signal. Line sync signal. Data clock. Left/right scan direction on panel module. Up/down scan direction on panel module. Serial interface clock.Fix to VDDI or VSS when not in use. SPI interface data input /output pin. Fix to VDDI level when not in use. Chip select input pin (“Low” enable). Digital Power Supply Voltage. No connection. Global reset. Maclight Display Co. Ltd www. szmaclight.com Email: sales@szmaclight.com

MACLIGHT DISPLAY CO., LIMITED 6. Inspection Criterion A. Sampling Method Unless otherwise agreed upon in writing, the sampling inspection shall be applied to the Customer’s incoming inspection. 1) Lot size: Quantity per shipment lot 2) Sampling type: Normal inspection , single sampling 3) Sampling table: MIL-STD-105D Acceptable Quality Level(AQL): Major=0.65 B. Inspection Method 1) Ambient Condition: a. Temperature: Room temperature 25±5℃ b. Illumination: Single fluorescent lamp non-directive(300 to 700 Lux) 2) Viewing distance The distance between the LCD and the inspector’s eyes shall be...

MACLIGHT DISPLAY CO., LIMITED 7. Inspection Criteria Inspection Standard missing Outline dimension No display Display abnormal Short circuit Missing segment Excess power consumption No backligt, flickering Missing compement Outline Dimension out of drawing tolerance Classification defect Major Major Major 2) Cosmetic defect A. Definition of inspection range For dot defect of TFT LCD which is not smaller than 3 inches, dividing three areas to make a judgment (according to figure 1). A area : center of viewing area B area : periphery of viewing area C area : Outside viewing area Viewing Area...

MACLIGHT DISPLAY CO., LIMITED B. Cosmetic defect criteria Judgment standard Inspection items Black spot, White spot, Bright Spot, 1 Pinhole, Foreign Particle, Particle in or on glass, Scratch on glass Black line, White line, and Particle Between 2 Polarizer and glass, Scratch on glass Acceptable number A zone B zone TFT LCD is smaller than 3 inches Total defective point(B,C) A W≦0.01