Automatic machine type 360
2Pages

Brochure RVS table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Arial", sans-serif; } .font2 { font:13.00pt "Arial", sans-serif; } .font3 { font:20.00pt "Arial", sans-serif; } .font4 { font:22.00pt "Arial", sans-serif; } .font5 { font:4.50pt "Arial Black", sans-serif; } MACHINE type 360 OPTIONAL equipment MECHANICAL SQUEEGEE LIFT needed to print ail around artwork PRINT REGISTRATION CHUCK AT PRINT STATION for print registration on the object uti-lising the ramp in the base of the object AUTOMATIC INK FEEDER controlled by peristaltic pump ROLLER CARRIAGE AT PRINT STATION proposed for objects having a small diameter in relation to their length (to avoid the possibility of mandrels bending). PUSHER AT PRINT STATION to ensure the position of the print with regard to the object height EJECTION BYSUCTIONCUP for placing objects on their bases, for instance, on a drying conveyor 360 NUMERIC The numeric loading and unloading arm has the advantage of a quick set-up by teaching procdure without tooling. AUTOMATIC jection The basic machine has a vertical turret fitted with eight mandrels for transferring ail types of objects capable of being positioned on a mandrel (tubes, jars, syringes.etc.) through the various stages of the machine. The turret assembly is driven by.a mechanical indexor supported by a welded ch驢ssis. Printing occurs in one direction with the head synchronised mechanically with ail the movements; the squeegee and floodbar are pneumatically controlled. At the print station, the objects are rotated either by friction or when registration is required through a rack and pinion assembly connected to the screen. The turret can be fitted with a UV curing unit, surface treatment device or other optional devices for various print requirements. GENERAL SPECIFICATION EJECTION chute BY SLEEVE on inclined 360 PLASMA To treat fragile surfaͭce and difficult materials.This pro-cess allows an exceptional surface tension without any heat addition FEEDING FROM INCLINED CHUTE BY PUSHER for perfectly cylindrical objects FEEDING FROM DESTACKER when the objects are presented in a stack, each object is picked up by a gripper and loaded on to the mandrel. AUTOMATIC feeding CORONA TREATMENT DEVICE to treat polyethylene or polypropyle-ne objects. Compared to flame treatment, this has the advantage of not heating the objects. IONISING DEVICE to eliminate sta-tic, with or without particle remo-ver (brush with vacuum). FEEDING FROM INCLINED CHUTE BY PUSHER WITH SELECTION for cylindrical objects that are uneven (such as with screw threads) preven-ting parallel movement. The inclined chute is fitted with a slection device which holds back the next object prior to that at the loading station. FEEDING FROM A WALKING BEAM for objects having a collar, such as syringes. EJECTION BY GRIPPERS for unloading objects on to pins of a drying oven or lehr for glass syringes EJECTION BY SLEEVE into the baskets of a drying oven. The object must be thick walled. EJECTION BY SLEEVE on to belt conveyor for further handling, such as loading into card-board cartons Overall dimensions width height Weight length 1,5 m 1,35 m 1,95 m 850 kg without UV dryer 1040 kg with UV dryer Main motor power 1,1 kW UV curing unit: 6 inch lamp rated at 300 W/inch Electrical consumption with UV dryer. 6 kW Air consumption 1 NmVh with 4-bar pressure inrQ®©[h3D[n)cs@ DUBUIT

Brochure RVS table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Arial", sans-serif; } .font3 { font:18.00pt "Arial", sans-serif; } .font4 { font:20.00pt "Arial", sans-serif; } .font5 { font:22.00pt "Arial", sans-serif; } ANCILLARY machine AN machines in the range are suitable for connection to an automatic unscrambler. In the same way various infeed devices can be fitted, such as loading into cardboard boxes DRYING conventional DRYING Thse machines can feed a flat belt...