92 MAConnect
20Pages

• Maximum of 20 solenoids can be powered by a single multi-pin connector. • Up TO 40 SOLENOIDS CAN BE POWERED BY MEANS OF A SECOND MULTI-PIN CONNECTOR STATION. • Left or right end connector adapters available. • Maximum allowable coil amperage is 250 milliamps. • Standard AC and DC voltage options available up to 240 volts. • Current connection types available are: 9, 15, and 25 pin sub-d connectors. 10, 16, 20, AND 26 PIN RIBBON TYPE CONNECTORS. 24 PIN AMP CPC CONNECTOR. • Wash-down Sub-d connectors available (9, 15 and 25 pin) - designed to meet NEMA4 and IP65 ratings. • Grounding of the...

92 Series MAConnect™ with SM32 • Maximum of 16 solenoids possible (24VDC with a maximum of 6.0 watts per solenoid ). • Maximum of 4 inputs available with PNP or NPN capability. • 16 inputs available with a tethered input module. • All outputs are protected by self resetting fuses. This protects the electronics in the event of a short and enables the node to remain active. • Left or right end SM32 adapters available. • Flexability to support remotely located stacks. • Designed to meet NEMA 4 and IP65 ratings - washdown (except Allen Bradley Remote I/O). • Multiple protocols available...

• Maximum of 16 solenoids possible ( 24VDC with a maximum of 6.0 watts per solenoid ). • Left or right end SM16 adapters available. • Flexability to support remotely located stacks. • Designed to meet NEMA 4 and IP65 ratings - washdown. • Available with common through ports (i.e. inlet, exhaust and ext. pilot ports ). • DeviceNet compatible.

92 Series MAConnect™ with Tethered Inputs • 16 inputs. • Field convertable for either positive or negative logic. • Inputs are divided into four groups of four. Each group is field convertible for either PNP or NPN. • Washdown model available - designed to meet NEMA 4 and IP65 ra

92 Series MAConnect™ Remote Manifolds • Easy hookup. • Remote stacks are compatible with Sub D and ribbon style connectors, SM32 and SM16 serial modules. • Primary and remote stacks can operate 20 solenoids in any configuration with Sub D connectors. • Primary and remote stacks can operate 16 solenoids in any configuration with SM32 or SM16 serial

Fluids: Compressed Air or Inert Gases Lubrication: Not required. If used, select a medium aniline point lubricant (between 180°F and 210°F) Safe Operating Temperature Range: 0°F to 120°F (-18°C to 50° C) Pressure Range: 20 to 120 PSI (Internal Pilot) Vacuum to 120 PSI (External Pilot) 35 to 120 PSI (3 Position, Internal/External Pilot) Electrical: AC 120/60 Inrush current 7.6 Volt-amps (.063 amps) Holding Current 4.8 Volt-amps (.04 amps) Maximum Coil Amperage - 250mA Maximum Voltage - 240VAC Dielectric Strength in Excess of 2000 Volts. Recommended Mating Sub D Cable Specifications 3 Amp...

Outputs: Number: 16 Channels / Solenoids on manifold Voltage Current: 24 VDC at .225 per channel (6.0 Watts max.) Inputs: Not available at this time Protocols: DeviceNet Current Consumption: Outputs - 4 A Max. Electronics - 200mA Voltage Ranges: Operating with single supply: 24VDC Operating separate supply for valves : 24VDC Safe Operating Temperature Range: 0-50° C (32-120°F) 10-90% RH (Non-condensing) Operating Atmosphere: No corrosive gases Enclosure: Designed to meet NEMA 4 and IP65

Specifications SM32 Manifold Outputs: Number: Voltage Current: 16 Channels / Solenoids on manifold 24 VDC at .225 per channel (6.0 Watts max.) Inputs: Number: Type: Protocols: DeviceNet Allen Bradley Remote I/O* Current Consumption: Outputs - 4 A Max. Electronics and Inputs - 75mA Voltage Ranges: Operating with single supply: 24VDC Operating separate supply for valves : 24VDC Safe Operating Temperature Range: 0-50º C (32-120ºF) 10-90% RH (Non-condensing) Enclosure: Designed to meet NEMA 4 and IP65 *This product incorporates technology which is licensed by Allen-Bradley Company, Inc....

* Must use “DU” Pilot Body Body Type and Exhaust Options 0 Base Only A Plug-In Std. Exhaust * C Plug-In w/exh. to Main Exhaust Pilot Style DM Muffled Exhaust DP Piped Exhaust DU Universal Pilot Pilot Exhaust out Main Exhaust Note:For Solenoids 30 volts or above, a ground wire is required Spools w/ Memory Spring L Sgl. Oper. Sgl. Press. N Sgl. Oper. Dual Press. Valve Function 0 Base Only A Sgl. Oper. Sgl. Press. B Dbl. Oper. Sgl. Press. C Sgl. Oper. Dual Press. D Dbl. Oper. Dual Press. E 3 Pos. Closed Center F 3 Pos. Open Center G 3 Pos. Sgl. Press. Press. Center Port Size and Thread Type In....

How to Order Adapters / Input ModuleMAConnect™ Adapter Assembly (Positive Commons - NPN) M-92010 - XX - X X 1 T 9 Pin Sub D 10 Pin 15 Pin Sub D 16 Pin 20 Pin 24 Pin Amp CPC 25 Pin Sub D 26 Pin 1 Internal Pilot Left End Leave Blank for NPTF Threads 2 External Pilot Left End P BSPPL Threads 3 Internal Pilot Right End T BSPTR Threads 4 External Pilot Right End Note: For Negative Commons (PNP) Use MOD 1705 after model number Note: For washdown Sub-D connector use MOD 532M after model number. MAConnect™ Adapter Assembly (Required For Connecting To A Remote Stack) M-92011 - XX -...

Protocol DN DeviceNet AB Allen Bradley Remote IO 12 Power Connector DeviceNet A 3 Pin Micro Bus Connector DeviceNet A 5 Pin Micro Inputs 00 No Inputs Location of MAConnect Adapter 0 No Adapter 1 Left End 2 Right End Adapter has common inlet and exhaust ports Output Indicator Lights Monitoring Valve Signal A St’d (16) Monitoring Bus Logic Signal B St’d (16) Power Connector DeviceNet A 3 Pin Mini B 4 Pin Mini C 3 Pin Micro AB Remote IO G 5 Pole Term. Bus Connector DeviceNet A 5 Pin Mini B 5 Pin Micro AB Remote IO F 3 Pole Term. Inputs No Inputs 1 Input 2 Inputs 3 Inputs 4 Inputs Tethered...

Examples for Ordering MAConnect™ Assemblies Valve Descriptions are Configured Left to Right Input Module N-SM005-BBCC-01 Inputs 1-8 (NPN) Inputs 9-16 (PNP) Positive Logic