82 MAConnect
24Pages

82 Series MAConnect™ with Sub-D • Maximum of 20 solenoids can be powered by a single multi-pin connector. • Up to 40 solenoids can be powered by means of a second multi-pin connector station. • Left or right end connector adapters available. • Maximum allowable coil amperage is 250 milliamps. • Standard AC and DC voltage options available up to 240 volts. • Current connection types available are: • 9, 15, and 25 pin Sub-D connectors. • 10, 16, 20, and 26 pin ribbon type connectors. • 24 pin AMP CPC connector. • Washdown Sub-D connectors available (9, 15 and 25 pin) - designed to meet NEMA 4...

82 Series MAConnect™ with SM16 • Maximum of 16 solenoids possible (24VDC with a maximum of 6.0 watts per solenoid). • Left or right end SM16 adapters available. • Flexibility to support remotely located stacks. • Designed to meet NEMA 4 and IP65 ratings - washdown. • Available with common through ports (i.e. inlet, exhaust and ext. pilot ports). • DeviceNet com

82 Series MAConnect™ with SM32 • Maximum of 16 solenoids possible (24VDC with a maximum of 6.0 watts per solenoid ). • Maximum of 4 inputs available with PNP or NPN capability. • 16 inputs available with a tethered input module. • All outputs are protected by self resetting fuses. This protects the electronics in the event of a short and enables the node to remain active. • Left or right end SM32 adapters available. • Flexibility to support remotely located stacks. • Designed to meet NEMA 4 and IP65 ratings - washdown (except Allen Bradley Remote I/O). • Protocols available (DeviceNet,...

82 Series MAConnect™ with Tethered Input or Output Modules • 16 Outputs • 16 Inputs • Inputs configured for either positive or negative logic. • Inputs and outputs are divided into four groups of four. Each group of inputs may be configured for either PNP or NPN. • Washdown models available - designed to meet NEMA 4 and IP65 ratings. • Individual modules required for either input

82 Series MAConnect™ Remote Manifolds • Easy hookup. • Remote stacks are compatible with Sub-D and ribbon style connectors, SM32 and SM16 serial modules. • Primary and remote stacks can operate 20 solenoids in any configuration with Sub-D connectors. • Primary and remote stacks can operate 16 solenoids in any configuration with SM32 or SM16 serial

Specifications 82 Series Valve Fluids: Compressed Air or Inert Gases Lubrication: Not required. If used, select a medium aniline point lubricant (between 180ºF and 210ºF) Safe Operating Temperature Range: 0ºF to 120ºF (-18ºC to 50º C) Pressure Range: 25 to 150 PSI (Internal Pilot, Sgl. Solenoid) 10 to 150 PSI (Internal Pilot, Dbl. Solenoid) Vacuum to 150 PSI (External Pilot) 25 to 150 PSI (3 Position, Internal/External Pilot) Electrical: DC 12/24 Volt AC 120/60 1.8w to 5.4w Inrush current 10.9 Volt-amps (.09 amps) Holding Current 7.7 Volt-amps (.06 amps) Maximum Coil Amperage - 250mA Maximum...

Specifications SM16 Manifold Outputs: Number: 16 Channels / Solenoids on manifold Voltage Current: 24 VDC at 0.225 per channel (6.0 Watts max.) Inputs: Not available at this time Protocols: DeviceNet Current Consumption: Outputs - 4 A Max. Electronics - 200mA Voltage Ranges: Operating with single supply: 24VDC Operating separate supply for valves : 24VDC Safe Operating Temperature Range: 0-50º C (32-120ºF) 10-90% RH (Non-condensing) Operating Atmosphere: No corrosive gases Enclosure: Designed to meet NEMA 4 and IP65

Specifications SM32 Manifold Outputs: Number: 16 Channels / Solenoids on manifold Voltage Current: 24 VDC at .225 per channel (6.0 Watts max.) Inputs: Number: 4 Type: 24 VDC NPN or PNP Logic Protocols: DeviceNet Allen Bradley Remote I/O* Profibus Interbus-S Current Consumption: Outputs - 4 A Max. Electronics and Inputs - 75mA Voltage Ranges: Operating with single supply: 24VDC Operating separate supply for valves : 24VDC Safe Operating Temperature Range: 0-50º C (32-120ºF) 10-90% RH (Non-condensing) Enclosure: Designed to meet NEMA 4 and IP65 * This product incorporates technology which is...

Valve Function Base Only Sgl. Sol. Sgl. Press. Dbl. Sol. Sgl. Press. Sgl. Sol. Dual Press. Dbl. Sol. Dual Press. 3 Pos. Closed Center 3 Pos. Open Center 3 Pos. Sgl. Press. Press. Center 3 Pos. Dual Press. Press. Center Sgl. Sol. Sgl. Press. Sol. on B End Sgl. Sol. Dual Press. Sol. on B End 3 Pos. Dual Press. Open Center 3 Pos. Dual Press. Closed Center Pilot Style TM Muffled Exhaust TP Piped Exhaust * TU Universal Pilot Pilot Exhaust out Main Exhaust AA AB AG AK AE DA FA FB FE FF out main exhaust) must use TU (universal pilot). Main valve exhaust cannot be restricted. Available on single...

Adapters / End Plate Kit MAConnect™ Adapter Assembly M-82010 - XX - X X 9 Pin Sub-D 10 Pin 15 Pin Sub-D 16 Pin 20 Pin 24 Pin Amp CPC 25 Pin Sub-D 26 Pin Internal Pilot Left End External Pilot Left End Internal Pilot Right End External Pilot Right End Leave Blank for NPTF Threads P BSPPL Threads T BSPTR Threads Note: For washdown Sub-D connector use MOD 532M after model number. Note: For Negative Commons (PNP) Use MOD 1705 After Model Number MAConnect™ Adapter Assembly (Required For Connecting To A Remote Stack) M-82011 - XX - X X 09 10 15 16 20 24 25 26 9 Pin Sub-D 10 Pin 15 Pin Sub-D 16...

Input and Output Modules Remote Tethered Input Module (For use with SM32 only) N-SM005 - X X X X - XX Inputs 1-4 B NPN C PNP Positive Logic Negative Logic Remote Tethered Output Module (For use with The SM16 and SM32) N-SM006 - X X X X A

Protocol DN DeviceNet AB Allen Bradley Remote IO Output Indicator Lights Monitoring Valve Signal A St’d (16) Monitoring Bus Logic Signal B St’d (16) Power Connector DeviceNet A 3 Pin Micro Bus Connector DeviceNet A 5 Pin Micro Inputs 00 No Inputs Adapter has common inlet and exhaust ports Location of MAConnect Adapter 0 No Adapter 1 Left End 2 Right End Power Connector DeviceNet A 3 Pin Mini B 4 Pin Mini C 3 Pin Micro AB Remote IO G 5 Pole Term. B 4 Pin Mini Bus Connector DeviceNet A 5 Pin Mini B 5 Pin Micro AB Remote IO F 3 Pole Term. G 4 Pin Micro (2 4-Pin Connectors) Inputs No Inputs 1...