PRIMOPlus Strand pelletizing system for all cases of application The dry cut pelletizers of the PRIMOPlus Series are characterised by their robust design. The double-sided bearing of the cutting rotor ensures high stability and precision, resulting in excellent quality of the cylinder pellets. Wear-protected machine parts also ensure a high degree of machine availability and profitability. Your benefits ¡ Shortest possible unguided section from feeding unit to cutting unit ¡ Sturdy, double-sided bearing of the cutting rotor to meet highest stability and precision standards ¡ Upper feed roll driven available ¡ Changes on the pellet length and weight to be made with Dual Drive ¡ Integration into automatic JSG system feasible ¡ Very high machine availability due to wear-resistant cutting tools ¡ Quick and easy access for cleaning and servicing; quick product changeover ¡ Use of a hybrid rotor with 200 mm diameter

PRIMOPlus Functionality and system components Functioning of the WSG systems Polymer strands extruded from a die head 01 pass through the cooling trough 02. The air knife 03 ensures effective strand drying prior to cutting. The residual moisture after strand drying evaporates in the evaporation section. The feed tools of the strand pelletizer 04 catch the polymer strands and direct them to the cutting tools where the strands are cut into pellets. The pellets are classified, cooled, and conveyed in subsequent operations 05. The cooling water is filtered and temperature controlled in a process water...

PRIMOPlus Strand pelletizer Strand pelletizer ¡ Strand draw-in speeds of up to 150 m/min possible ¡ Reduced cleaning and product changing times due to optimization of dead spaces and deposits inside the cuttinghead ¡ Minimised changeover and setup times thanks to good accessibility and simple operation of the setting and assembly elements ¡ Infinitely variable pellet length adjustment through Dual Drive possible ¡ The design of the knife holder ensures minimum deformation of the cutting blade and highly consistent cutting gap ¡ Easy-exchange cutting head guarantees maximum machine availability...

PRIMOPlus Technical data Technical data: Operating width: Drive system: AC motor with belt drive Motor power of pelletizer: Line speed at pellet length of 3 mm:: No. of strands at 75 % utilization rate and a pellet diameter of 3 mm: Throughput rates [kg/h]*: Product: Thermoplastic elastomers: Masterbatch with > 40 %fillers: * Pellet length 3 mm, pellet diameter 3 mm, and maximum number of strands. Maximum flexibility Due to the possibility of using different cutting tools, the PRIMOPlus offers a maximum of flexibility. The granulator is suitable for the use of 200 mm Scheer knife segments. Automatik...