M-ASG Strand pelletizing system for high production capacities When it comes to high throughput rates with consistently high pellet quality, the dry-cut pelletizers of the M-ASG series are the right choice. They are suitable for throughputs of up to 12,500 kg/h and can be adapted to individual requirements using variable system components. Your benefits ¡ Sturdy, double-sided bearing of the cutting rotor to meet highest stability and consistency standards ¡ Roller bearings positioned outside the cutting chamber to allow high production temperatures ¡ Changes on the pellet length and weight to be made with Dual Drive ¡ Integration into JSG system feasible ¡ Very high machine availability due to wear-resistant cutting t

M-ASG Functionality and system components Functioning of the WSG systems Polymer strands extruded from a die head 01 pass through the cooling trough 02. The air knife 03 ensures effective strand drying prior to cutting. The residual moisture after strand drying evaporates in the evaporation section. The feed tools of the strand pelletizer 04 catch the polymer strands and direct them to the cutting tools where the strands are cut into pellets. The pellets are classified, cooled and conveyed in subsequent operations 05. The cooling water is filtered and temperature controlled in a process water unit...

HL 20 MG Headline 50 schwarz MG Strand pelletizer Quick and easy access to all cutting chamber components, without the need for tools Strand pelletizer ¡ Strand draw-in speeds of up to 180 m/min possible ¡ Quick and easy access for cleaning and setting ¡ Lower feed roll driven by a separate motor and belt drive allowing a variable adjustment of the pellet length ¡ The design of the knife holder ensures minimum deformation of the cutting blade and highly consistent cutting gap ¡ Easy-exchange cutting head guarantees maximum machine availability ¡ No deposits within the cutting head ¡ Upper feed...

M-ASG Technical data Technical data: Operating width: Drive system: AC motor with belt drive Motor power of pelletize: Line speed at pellet length of 3 mm: No. of strands at a 75 % utilization rate and a pellet diameter of 3 mm: Throughput rates [kg/h]*: Product: * Pellet length 3 mm, pellet diameter 3 mm, and maximum number of strands Data and illustrations refer to the date of printing. Changes may be made without special notice. Products and processes of MAAG are protected by patents.