EBG Dry-cut belt conveyor pelletizing system The belt conveyor pelletizing system EBG is specifically designed for the compounding of water-sensitive or highly filled (> 60 %) or fragile products. Variable system configuration permit a perfect adaptation to the product to be processed. Using the belt conveyor, even elastic and very flexible polymers may be handled easily and efficiently. Your benefits ¡ ¡ ¡ ¡ ¡ ¡ Wide processing window Very slow drawing speed possible, starting at 8 m /min Strand cooling by air, water or both Due to linear pelletizer feed, no strand breaks Processing belt adaptable to different pelletizing heights Retro-fitting to existing pelletizi

EBG Dry-cut belt conveyor pelletizing system Instead of being conventionally extruded into a water bath, the polymer strands are extruded directly onto a plastic or steel conveyor belt, which carefully draws the fragile strands to the pelletizing unit. This controlled drawing of the strands while they are still in a molten state prevents breaks in the strands and enables them to be directly fed into the pelletizer, where they are cut into uniform pellets. Depending on the application, the strands may be cooled with air, water, or both. Where water cooling is used, the SE air knife can be used...