DURO belt dryer Efficient pellet drying technology for abrasive pellets The DURO belt dryer in combination with the underwater pelletizing systems from Gala and Automatik is the perfect solution for the production of abrasive or brittle pellets such as compounds highly filled with fiber glass or minerals. The drying process does not use any rotating parts and thus is a very gentle process reducing costs related to wear to a minimum. Your benefits ¡ Most gentle pellet handling due to the lack of relative movements of the pellets against the dryer components ¡ Minimum dust ¡ High product quality ¡ Minimized life cycle costs due to reduced wear and extended lifetime of the components in direct contact with th

DURO belt dryer The solution for abrasive pellets Functioning The slurry of water and pellets is fed through through the pre-watering chute 01, which removes up to 95% of the process water. The pellets are then evenly distributed onto the perforated conveyor belt 02. Suction through the perforated belt 03 at high airspeed removes surface water from the pellets. The residual heat of the pellets assists in the evaporation of the remaining surface moisture. The pellets may be further cooled in subsequent components, e.g. a spiral cooling conveyor. The collected water 04 is recirculated back to the...