Cinox - V - Therminox - V

Product catalog summary

Overview: The cinox®-V and therminox®-V are stainless steel discharge pumps designed for chemical processes, particularly for handling highly viscous fluids. These pumps ensure gentle extraction from reactors and degassing devices, even at low inlet pressures, providing optimum filling characteristics and short dwell times.

Key Benefits:

Optimum fill characteristics due to enlarged inlet and geometry.
Low pulsation and high efficiencies with application-specific clearances.
Reliability, longevity, and safety.

Technical Specifications:

Viscosity range: 0.3 to 4,000,000 mPas.
Temperature range: -30 to 320 °C.
Suction pressure: Vacuum up to 16 bar.
Discharge pressure: Vacuum up to 200 bar.
Flow rate: 2.5 to 265 l/min (higher rates available upon request).
Materials: Stainless steel housing and gear shafts, hardened tool steel bearings.
Shaft seal: Double mechanical seal with optional interlock or heater connections.
Connections: Flanges available in ANSI, DIN standards.

Applications: Suitable for pumping media such as prepolymers, oligomers, monomers, dopes, spandex, resins, adhesives, silicones, waxes, paraffins, emulsifying agents, and gum base.

Accessories and Options:

Product connecting flanges, motors, gear reducers, universal cardan shafts, hubs, frequency converters, and sealing liquid systems.
Options for electrical heating and heated product flanges.

Certificates: Available certificates include ATEX, 3.1, German Air Quality (TA-Luft), and performance test certificates.

Catalog excerpts

cinox®-V therminox®-V Stainless steel discharge pumps for chemical processes The pump models cinox®-V therminox®-V are discharge pumps. They have been designed for highly viscous fluids, which are gently extracted from reactors and degassing devices even when the inlet pressure is low, ensuring optimum filling characteristics and short dwell times. This new pump series combines the outstanding flow characteristics of the polymer pumps with the exacting requirements of the chemical industry. Your benefits Optimum fill characteristics due to enlarged inlet and optimum inlet geometry Low pulsation High efficiencies thanks to application-specific clearances Reliability Longevity

Open the catalog to page 1

cinox®-V therminox®-V 28-70 flow rate @ 0 bar ∆P Application limits: Viscosity: Suction pressure: Discharge pressure: Flow rate : Technical specifications: Housing: Stainless steel Stainless steel Hardened tool steel Shaft seal: Flanges (other optional) ANSI, DIN Enlarged inlet: Double mechanical seal Interlock or heater connections available Seal ring from a range of materials Packing gland throttled (optional spring loaded) Enlarged inlet geometry for low NPSH at high viscosities A range of typical pumping media Prepolymers, oligomers, and monomers Dopes Spandex Resins Adhesives Silicones Waxes...

Open the catalog to page 2