Specifications
The MANTIS TM is a lightweight phased-array flaw detector featuring Total Focusing Method (TFM). It supports a maximum active aperture of 16 elements and can perform linear, sectorial, and compound scanning. The device can handle up to 64 channels and supports various focusing modes including true depth and sound path. It is compatible with linear, matrix, DLA, and DMA probes, and can manage up to 6 probes and 8 groups with 2,048 delay-laws.

Real-Time TFM
The system supports reconstruction channels ranging from 16 to 64 elements, with a maximum TFM image point count of up to 1 million in post-processing. It offers a refresh rate of up to 80fps and supports direct, indirect, and converted sound paths. Calibration wizards are available for various scans including A-Scan, B-Scan, and 3D view.

Pulsers
The phased array channels use a negative square pulse with a width ranging from 35ns to 1250ns, while UT-TOFD channels range from 30ns to 1250ns. The high tension voltage ranges from 12V to 90V for phased array and up to 200V for UT-TOFD, with a maximum PRF of 20kHz.

Digitizer
The digitizer supports real-time summation on 16 channels with a 16-bit amplitude resolution and a maximum sampling frequency of 100 MHz. It allows real-time averaging up to x32 and digitizing depth up to 16k samples.

Acquisition
The device features hardware acquisition gates and a maximum data flow of 150 MB/s on a 128Gb SSD, extendable up to 1TB. It supports various data recording and compression methods.

Receivers
Both phased array and UT-TOFD channels have an input impedance of 50 Ω, with frequency ranges of 0.4 to 20MHz and 0.6 to 25MHz respectively. The gain can be adjusted up to 120dB.

Wizards
The system includes CAD overlay, 3D view, and various calibration wizards for amplitude, base-time, and wedge calibration. It supports probe and weld geometry design.

Analysis
CaptureTM software provides analysis and reporting tools, compatible with CIVA and ENLIGHTTM. It supports various scan views and customizable inspection reports.

General
The device dimensions are 320mm x 220mm x 100mm, with a weight of 4.4kg including the battery. It features an 8.4-inch high contrast resistive screen and operates within a temperature range of -10°C to 45°C. It is designed for IP66 and complies with MIL-STD-810G for shock resistance.

I/O
The device includes connectors for phased-array and UT-TOFD, encoder inputs, USB ports, and supports remote control and data transfer via Ethernet and WiFi.