高效永磁同步电机 Electronically Commutated Motors T 系列 EC 电机 T Series of EC Motor

Company introduction General information Model number nomenclature Motor Model list

公司简介 Company introduction 莫安迪（苏州）电机技术有限公司成立于 2015 年 10 Motor and Drive （ Suzhou ） Technology Co., Ltd. was established in October 2015. It is mainly committed to the development and manufacturing of energy-efficient motor products. The product target is the highest motor energy- saving standard IE5 in Europe. The products and technology are forward-looking. The company has the ability of motor R & D and manufacturing, driver R & D and manufacturing, and provides high-efficiency motors for many energy- efficient product companies in Europe, the United States and China. At present, with the establishment...

产品概述 General information - 作为一家关注环境和节能的专业电机制造商，我们最重 要的目标之一是帮助合作伙伴降低运行成本，提高使用 寿命和盈利能力，并使生产更加环保。 T-EC系列电机是在IEC标准基础上设计的PMS（永磁同 步）电机，目前有四种机架尺寸：T71EC#、T90EC#、 T100EC#、T132EC#，最大输出功率22kW，最大扭矩 70Nm。 Product brief As a professional electric motors manufacturer who cares about environment and energy saving, one of our most important goals is to help our partners to reduce total life operation costs, increase profitability and make production more environmentally friendly. The T-EC series motors are PMS (Permanent Magnet Synchronous) motors designed on the basis of IEC standards and are currently available...

T-ECI 系列-永磁同步电机集成驱动 F-ECI 系列-永磁同步电机集成驱动 Product series EC motors are permanent magnet synchronous motors specially designed according to IEC standards. M&D EC motors will be used in the next generation where more energy efficient products are required. Exceeds IEC 6003430-2-2016 “Energy Efficiency Classes for AC Speed Motors”. 2. M&D EC motors lead the way in the next generation of motor efficiency and performance technology. E-MAX motor contain three series: ◼ T-EC series – Permanent magnet synchronous motor T-ECI series - Permanent magnet synchronous motor integrated drive F-ECI series - Permanent...

型号命名方式 Model number nomenclature T 100 EC 14 G 36 C2 B14 T1 F 1 Product platform T: IEC 系列 T: IEC Series 基座尺寸： EC: 永磁电机 EC: permanent magnet motor 额定扭矩： Rated torque: 14 = 14Nm 冷却方式： Cooling method: G = IC411 – TEFC 全封闭电机，风扇冷却，带风扇和风扇罩。 Totally enclosed motor fan cooled (own fan ventilation). V = IC418 – TEAO 需气流冷却的全封闭电机。 Totally enclosed motor air over (no fan-motor in air stream). N = IC410–TENV 全封闭电机

adMotor Model list Frame

最大速度 Maximum speed (r/min) 额定扭矩 Rated torque (N.m)

最大速度 Maximum speed (r/min) 额定扭矩 Rated torque (N.m)

Inverter and motor connection (- Motor and Drive (Suzhou) Technology Co., Ltd

- EC motor parameters for inverter 永磁同步电机必须由变频器驱动。电机不能直接连接到 正常交流电源。变频器可以是带有矢量控制或 PM 电机 控制模式的商用驱动器。变频器需要设置正确的电机参 数（见下表）。详细参数可在模型数据表中找到。 （例如：T100EC19X36 型号） PMSM must drive by the VSD. The motor cannot connect to the normal AC power directly. The VSD can be the commercial drive with vector control or PM motor control mode. VSD need to be set up the correct motor parameter (see below table). The detail parameters can be find in the model data sheet. (T100EC19X36 model such as a sample) 项目 Items 变频器输入电压： Inverter input voltage: 极数： Pole numbers: 最大速度： Max speed: 最大频率： Max frequency: 变频器输出电压： VSD...

- EC motor running power range Different cooling condition the motor power range will be different. (T100EC19X36 model such as a sample) Good cooling allows the motor to operate in a higher power range. IC411 is 1.1 times that of IC410, and when operating under conditions of IC418, the airflow through the motor surface should be maintained at not less than 3

The format of the rating plate is for reference only. The final data will be subject to the actual rating plate.

外形图及安装尺寸 Dimension drawings Shaft size（轴伸尺寸）

莫安迪（苏州）电机技术有限公司 Motor and Drive（Suzhou

Motor and Drive (Suzhou) Technology Co., Ltd

销售地址及联系方式 江苏省太仓市东亭北路 165 号 8 号楼三、四层 联系人：陈亮 邮箱：[email protected] 电话：18962620760 Sales address and contact information F3, F4, #8 building, No. 165, North Dongting Road, Taicang City, Jiangsu Province Contact: Bright Chen E-mail: [email protected] Tel: 18962620760 我们有权进行技术修改或更改本文件内容，恕不另行 通知。采购订单适用协议细节。对本文件可能存在的 失误或信息不足，M&D不承担任何责任。 我们保留对本文件、主题及其中插图的所有权。禁止 在未事先获得M&D书面同意的情况下向第三方复 印、公布或私自使用本文件内容（无论是全部内容还 是部分内容）。 莫安迪（苏州）电机技术有限公司 Motor and Drive（Suzhou）Technology Co., Ltd We reserve the right to make technical modifications or changes to the content of this document without notice. The details of the...