SP2020-H - 2 Pages

Add to MyDirectIndustry favorites

Catalog excerpts

Embracing Challenge Gas Sample Probe Series SP® Version SP2020-H(220)/C/I/BB and SP2020-H(220)/C/I/BB/F Special Features Heated sample probe with integrated The M&C probe SP2020-H(220)/C/I/BB and /BB/F is based on the standard probe SP2000-H. C alibration gas injection P robe outlet isolation Blow back • Calibration gas will be injected into the probe through a check valve /C directly to the sample outlet. No calibration gas is lost into the stack. • An isolation valve /I shuts off the sample outlet from the internal filter area. • Through a high flow rate check valve /BB, which is fixed to the internal probe area, blow back of the filter housing area and the insitu probe tube will be done. • Through a high flow rate check valve /BB/F, which is fixed to the filter­­ housing wall, blow back of the incorporated ceramic filter will be done incl. the filter area and the insitu probe tube. Technical specifications and illustrations are without obligation, subject to modifications. 09.96/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

 Open the catalog to page 1

Technical Data SP2020-H/C/I/BB SP2020-H/C/I/BB/F SP2020-H220/C/I/BB SP2020-H220/C/I/BB/F 20S2020a 20S2025a 20S2021a 20S2030a max. 180 °C max. 220°C 115V 60Hz, 800W Check valve, cracking pressure: >0,7 bar g connection: tube connector 1/4“ o.d. Bellow valve with pneum, actuator, control pressure: 3-10 bar g connection: 1/8“NPT i High flow rate check valve, cracking pressure: >0,7 bar g, recommended: 3-6 bar g we recommend short pressure pushes to avoid decreasing of temperature in blow back area. connection: tube connector 3/8“ o.d. material: stainless steel 316Ti, dimensions: 3“ 150 Ibs...

 Open the catalog to page 2

All M&C TechGroup Germany GmbH catalogs and technical brochures

Archived catalogs