Catalogs >
M&C TechGroup Germany GmbH >
Sample Tubes for Gas Sample Probes Series SP®

Sample Tubes for Gas Sample Probes Series SP®
2Pages

Catalog excerpts

Sample Tubes for Gas Sample Probes Series SP® - 1

Embracing Challenge Special Features ■ For dust levels up to 2 g/m3 ■ Point-selective sampling ■ Sampling downstream wet scrubber up to 90 °C [194 °F] ■ Sampling temperature up to max. 1800 °C [3272 °F] ■ Different lengths ■ Great variety of materials ■ Easy mounting [ IVteC®] Sample Tubes for Gas Sample Probes Series SP® with G 3/4" connection thread Application The M&C sample tubes are used in combination with the M&C gas sample probes series SP® for point-selective continuous gas sampling in processes with low dust levels. Description The M&C probe sample tubes SP210/SS and SP2000 are selected according to the specific applications. Influencing process parameters are the gas composition, dust content, water vapor saturation, temperature, pressure and gas velocity. In addition to the standard length 'LI', other lengths up to 'L max' are available on request. For applications with low sample gas flow, sample tubes SP2000/SS-Vm are equipped with volume displacers to decrease the downtime. Gas sampling downstream a wet scrubber with a high content of water is carried out with the M&C sample tube SP32 equipped with an integrated demister for droplet separation. Depending on the selected material, the M&C sample tubes are equipped with a welded thread adapter or a support adapter. They are partially made out of different materials than the tubes, depending on manufacturing. See table below. The connection thread enables easy mounting into the mounting flange of the M&C gas sample probes. Further sampling accessories: For a high dust load: pre-filter V20, V12 For lower deviation of dew point on process side: heated sample tubes SP30, SP35 Technical specifications and illustrations are without obligation, subject to modifications. 11.19 - 1.00.01 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

Open the catalog to page 1

Sample Tubes for Gas Sample Probes Series SP® - 2

Dimensions Sample tube SP210SS / SP2000... / CR-N with welded thread connection Sample tube SP2000/ CR-2(20) /AO for >1300 C with support adapter Sample tube SP32 with demister for gas sampling behind wet scrubber Material Tube/connection part SP2000/AO w/o 20S9385 connection part/adapter Adapter for 20S9395 SP2000/AO Adapter for 20S9397 SP2000/AO PVDF/PTFE-fiber glass-reinforced PVDF/PTFE-fiber glass-reinforced PTFE/PTFE-fiber glass-reinforced Titan Stainl. steel 316Ti Stainl. steel 316Ti Stainl. steel 316Ti Hastelloy® C4 Kanthal®/SS 316Ti Inconel® Alloy HR160®, Cr AL2 O3/Hastelloy® C4 Cr...

Open the catalog to page 2