Portable Gas Sample Probe
4Pages

Sample Probe Special Features ■ Lightweight design, easy to handle and compact construction ■ Electrically heated - adjustable from 100 to 180 °C [212 to 356 °F] ■ With integrated microfilter ■ Variable sample tube and connection technique ■ Integrated temperature measurement ■ Gas sampling also with heated sample tube Application Previously, gas sample probes designed for stationary use had to be used for i nspection measurements carried out at different locations. The weight and bulkiness of such units often caused problems for technicians conducting mobile measurements. Now the light, handy and heated gas sample probe PSP4000-H has been developed as a logical complement to the portable M&C sample gas conditioning systems. Despite its compact design, the unit guarantees a full range of functions. Optionally, the process temperature at the end of the sample tube can be measured by an integrated temperature sensor parallel to the gas sampling. To prevent the temperature from falling below the dew point in the sampling area, a heated sample tube SP34-H (see data sheet 2.19) is available. With the PSP4000-H/C/T version, temperature measurement during gas sampling is performed by an integrated length-adjustable temperature sensor Fe-CuNi. In combination with the gas sample probe PSP4000-H, a specially assembled heated sample line PSP4M4/6 with replaceable PTFE tube or PSP4M4/6-W with additionally smaller outer diameter is offered. The electrical supply of the probe is then ensured via the power line integrated into the sample line. An aluminium-framed case is optionally available for the safe transport of the probe and the up to 5 m long PSP4M4/6 or the up to 8 m [= 26.25 ft] long PSP4M4/6-W heated sample line. Description The portable gas sample probe PSP4000-H is electrically heated. Temperature controlling is ensured by an integrated capillary sensor thermostat, adjustable from 100 to 180 °C [212 to 356 °F]. When the operating temperature is reached, an indicator light extinguishes and then flashes during the temperature control cycle. The thermally insulated housing is equipped with a carrying handle and a chain for in-situ attachment. The integrated ultrafine filter element with 2 qm filter porosity reliably retains the contamination of solid particles and is easy to change in just a few simple steps. For heavy-oil furnace measurements, a stainless steel filter wool receptable FW is optionally available. The wide and versatile range of sample tubes with diameters from 6 to 12 mm, adapters and thread fittings allows adaptation to the most varied local circumstances. With the version PSP4000-H/C, calibration gas feeding into the probe is possible without dismounting the probe. Technical specifications and illustrations are without M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany obligation, subject to modifications. 07.19 - 1.01.00 info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-11

Portable Gas Sample Probe PSP4000-H Basic version PSP4000-H Sample facilities Sample tubes incl. connector Length: 1m* Material: SS316 3/8" Connector incl. PTFE-ferrule 8mm Cable 4m * with plug Heated sample line PSP 4M4/6 Swagelok union 94S0025 Plug 94S0020 O-Ring 94S0030 Adapter for extensible probe length Tube 8x1mm , Material: SS316 PSP4000-H/C/T Adapter with cone-shaped part for openings of Ø10-20mm Thermo couple sensor Extensible probe tube length of 80-200mm Thermo couple sensor PTFE-key ring M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com •...

Technical Data Probe Series SP® Portable Version PSP4000 Technical specifications and illustrations are without obligation, subject to modifications. 07.19 - 1.01.00 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

Options Part No. 40S9130 Extra charge for PSP4000-H with 0 8 mm tube connector in the sample gas outlet 40S9100 Extra charge for PSP4000-H/FW with stainless steel filter wool receptacle including glass wool filling, filter S-2K not included, connection M 12, Sample adapter with variable sample tube length: 40S9005 Adapter fitting 3/8" with gasket and 8 mm PTFE sealing ring 40S9000 Adapter with cone transition for openings of 0 10 to 20 mm and 0 8 mm sample tube out of SS 316TI, extensible from 80 to 200 mm. [~ 3.1" to 7.9"] 40S9010 Sample tube 0 8 mm with position mark, for extensible probe...