Hose and Tube Fittings Series 1 - 3
5Pages

{{requestButtons}}

Catalog excerpts

Hose and Tube Fittings Series 1 - 3 - 1

Embracing Challenge Hose and Tube Fittings Series 1 - 3 out of plastics PP, PVDF, PTFE Special Features Corrosion resistant Gas tight Easy to handle Application Hose and tube fittings as well as fittings of series 1 to 3 out of plastics are ndispensable i and well proven accessories in the analysis technique in order to guarantee a safe and gastight connection of equipment with hoses and tubes. Different connection threads Description The hose fittings series 1 are used for connection of nonrigid flexible tubes with a defined inside and outside diameter. The sealing and clamp system of the tube fitting 1 is based on a special fittings body with a centered hose nozzle. The tube must be cut straightly before it is pushed over the hose nozzle until the limit stop. The tube is locked via the ferrule that is pressed on the tube by a knurled nut. This avoids shearing forces and torsion effects. For safety reasons the clamp ring is equipped with a shoulder that pushes against the fittings body during the installation. This guarantees a defined contact pressure of the tube. Tube fittings series 2 are applicable for unflexible rigid hoses and tubes with given outside diameter. Both hoses and tubes must be cut straightly and burred before they are pushed into the fitting until the limit stop. The tightness is guaranteed by the double cone ferrule 2 respectively the separate back and front ferrule 2N which are pressed on the line via the hexagon nut. Thread fittings and flanges of the series 3 complete the range of necessary accessories. For GL-connections please use the special M&C GL-adapters. You can find orresponding c hoses and hose cutters in the M&C catalogue. – See data sheet 11.5, 11.7. – Technical specifications and illustrations are without obligation, subject to modifications. 09.96/12.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax

Open the catalog to page 1
Hose and Tube Fittings Series 1 - 3 - 2

The following fittings are preferred standard versions and available in stock. Other executions, materials, dimensions (in inches as well) on request (minimum order quantity!). Technical Data Fitting Series 1-3 Operating temperature Storage temperature Max. permitted operating pressure at 20 °C Connection thread Material PVDF (Polyvinylidenefluoride) Material PP (Polypropylene) -20 °C up to +80 °C -5 °C up to +60 °C -30 °C up to +110 °C -20 °C up to +80 °C PN10, 10 bar G 1/8, 1/4, 3/8, 1/2 pipe thread, DIN ISO 228 1/8, 1/4, 3/8, 1/2 NPT-thread, USAS B2.1 M 10x 1,5 metric screw thread, DIN...

Open the catalog to page 2
Hose and Tube Fittings Series 1 - 3 - 3

Example of order: 20 pieces of male elbows, G1/4"-DN10/12, PVDF. Part No. 05V4070.Look at the table for male elbow. In the adjacent field you can see the material PVDF. The corresponding part No. is written down in line 'G1/4'and column '10/12' - 05V4070.Male Connector, Series 1, out of PVDF and PP G 1/2" 05V1087 05V1135 1/8" NPT 05V2045 05V2050 05V2055 05V2090 05V2095 05V2100 1/4" NPT 05V2060 05V2065 05V2070 05V2105 05V2110 05V2115 Female Connector, Series 1, of PVDF and PP Technical specifications and illustrations are without obligation, subject to modifications. 09.96/12.06 M&C...

Open the catalog to page 3
Hose and Tube Fittings Series 1 - 3 - 4

Union Connector, Series 1 out of PVDF and PP, hose / hose, hose / tube Please find the Part No. of all available standard versions in this list: Union Connector, Series 2, tube / tube out of PVDF and PTFE Please find the Part No. of all available standard versions in this list: Tee-Connector, Series 1, out of PVDF and PP Please find the Part No. of all available standard versions in this list: M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111 Technical specifications and illustrations...

Open the catalog to page 4
Hose and Tube Fittings Series 1 - 3 - 5

Plug, Series 3, out of PTFE, PVDF and PP Please find the Part No. of all available standard versions in this list: Thread: Thread: Material G 1/8" G 1/4" G 3/8" G 1/2" 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT Hose nozzle, Series 3, out of PVDF and PP Please find the Part No. of all available standard versions in this list: Tube i. 0 mm, material PVDF Tube i. 0 mm, material PP Thread G 1/8" G 1/4" G 3/8" Front ferrule 2 Nut 2 Back ferrule 2N Front ferrule 2N Front ferrule 2 and back-/ front ferrule combination 2N are compatible. Back ferrule 2N made of PTFE, front ferrule 2N made of PEEK....

Open the catalog to page 5

All M&C TechGroup Germany GmbH catalogs and technical brochures