Gas Sample Probe Series SP® - Version SP2600-H/C/I/BB/F
3Pages

Embracing Challenge [ M&C®| Gas Sample Probe Series SP® Versions SP2600-H/C/I/BB/F/1K190 and SP2600-H/C/I/BB/F/0,1 GF190, electrically heated Special Features ■ Filter element with particularly large filter surface ■ Optimum operational reliability ■ Universal applicability ■ Adaption to nearly all process conditions due to its compact and modular design ■ Easy mounting and maintenance ■ Small stagnant space ■ Integrated possibility for blowback and shutting off the sample outlet Application The probes M&C type SP2600-H/C/I/BB/F, based on type SP2000-H (see data sheet 2.1), are used for continuous gas sampling in processes with high dust levels, high temperatures and/or high humidity. Due to the particularly large filter surface and the blowback possibility for the filter element, this type of probes achieves a very long service life especially in those cases where pre-filters cannot be used. For this purpose, a check valve for blowback and a pneumatic isolation valve for the sample gas outlet are integrated into the probe. Version SP2600-H/C/I/BB/F/0,1GF is suitable for dusts with extremely fine particles of up to 0.1 pm grain size. Version SP2600-H/C/I/ BB/F/1K190 can be purged back very efficiently due to its double-ply filter element with an outer filter membrane of 1 pm porosity. Description The sample probes are designed for easy installation, reliable operation, trouble-free maintenance and a variety of applications. Depending on the application, different sample tubes (see data sheets 2.15 and 2.16), not included in the scope of delivery of the probe, are screwed into the thread (G 3/4" i) of the filter housing. The large surface filter element made of ceramic or glass fiber is placed in a housing with low stagnant space outside the process. The probes are constructed in such a way that changing the filter element does not require the sample line to be dismounted and therefore, a contamination of the clean gas is avoided. The special design of the heating element of the SP2600 (with weather protection cover) permits controlled heating of the complete filter housing including the mounting flange up to 180 °C [356 °F]. This ensures reliable operation outside the process preventing the temperature from falling below the dew point. In the standard version, the temperature is controlled by an integrated capillary sensor thermostat with high temperature limiter and low temperature alarm function in a compact arrangement directly on the probe. Feeding calibration gas is possible via an integrated check valve. Additional functions of the probe SP2600-H/C/I/BB/F: • Calibration gas is injected into the probe through a check valve /C directly to the sample outlet. No calibration gas is lost into the stack. • An isolation valve /I shuts off the sample outlet from the internal filter area. • With a high flow rate check valve /BB/F, which is fixed to the heated filter housing wall, blowback of the integrated filter element including the filter chamber and the in-situ probe tube or the pre-filter is carried out. Technical specifications and illustrations are without obligation, subject to modifications. 06.19 - 1.00.00 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-

Technical Data Gas Sample Probe Version Part No. Integrated blowback Weather protection cover Terminal box Filter housing material Sealing materials Probe flange sealing material In-situ probe tube/pre-filter Sample pressure max. Ambient temperature Filter chamber volume Filter element porosity Thermostat, temperature adjustment Ready for operation Low temperature alarm contact Sample gas outlet connection Blowback/test gas connection Shut-off valve connection /I Pressure range contol air /I Power supply Electrical connections Electrical equipment standard Mounting flange Stainless steeel...

Technical specifications and illustrations are without obligation, subject to modifications. 06.19 - 1.00.00 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 •