Gas Sample Probe Series SP®Version SP2000, SP2000-H, SP2300-H, SP2400-H Special Features ■ Optimum operational reliability ■ Universal applicability ■ Adaption to nearly all process conditions due to its compact and modular design ■ Easy mounting and maintanance ■ Small volume, fast response time Application The M&C sample probes version SP2000, SP2000-H, SP2300-H and SP2400-H are used for continuous extraction of gases from dust loaded, high-temperature and/or humid processes. Description The sample probes are designed for easy installation, reliable operation and trouble free maintenance. They are versatile in application and depending on the task to be performed, various sample tubes or pre-filters (see data sheets 2.14 and 2.17), not included in the scope of delivery, can be simply screwed into the probe (G 3/4" thread). The filter element (ceramic is standard, optionally others) with a large surface area and high capacity is located in the external housing. The design offers little or no stagnant space outside the process. The probes are designed in such a way that changing a filter element does not involve the use of tools. In this operation, neither the sample probe tube nor the sample line need to be removed, thus avoiding contamination of the clean gas path and maintaining the integrity of the system. The sample tube can be cleaned, washed or rodded out from outside the process. The special design of the heating element of the SP2000-H, SP2300-H, SP2400-H (with protective hood) permits controlled heating of the complete filter housing, including the mounting flange up to 180 °C [356 °F] (version /H320 up to 320 °C [608 °F]). This ensures reliable operation outside the process preventing the temperature from falling below the dew point. The temperature of the standard probe is controlled by an integral compact design capillary sensor thermostat with an excess temperature limit switch and an alarm function for temperature failure. The probe can be provided with test and reference gas facilities. Depending on the gas composition, it is possible that the standard material of the probe body (stainless steel 316) will not be sufficiently corrosion-resistant. In this case, probe SP2300-H made of PTFE or SP2400-H made of Titanium should be used. Technical specifications and illustrations are without M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany obligation, subject to modifications. 08.19 - 1.00.01 [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-

Technical Data SP2000-H Basic Version with Options (Examples) Technical specifications and illustrations are without obligation, subject to modifications. 08.19 - 1.00.01 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

Basic Versions and Options (Choice) Basic Versions Filter housing lid for high flow rate with filter element 0,1GF /HF 20S9016 Technical specifications and illustrations are without obligation, subject to modifications. 08.19 - 1.00.01 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-11

Short term - not possible X possible The above table only indicates the possible options for the different probe types. It does not provide information regarding the possible combinations of these options with each other in a probe model. In case you are looking for several options to be combined, please ask our sales team for technical advice. M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935- Technical specifications and illustrations are without obligation, subject to modifications. 08.19...