Gas Sample Probe Series SP® - Version SP2200-H/C/I/BB/F

Product catalog summary

Overview
The document provides technical details about the M&C TechGroup's Gas Sample Probe Series SP®, specifically the SP2200-H/C/I/BB and SP2200-H/C/I/BB/F models. These probes are designed for applications requiring heated sample probes with integrated valves for calibration gas injection, probe outlet isolation, and blow back.

Special Features

The probes allow calibration gas to be injected directly into the sample outlet through a check valve, ensuring no gas is lost into the stack.
An isolation valve is included to shut off the sample outlet from the internal filter area.
High flow rate check valves are used for blow back of the filter housing area and the insitu probe tube, as well as the incorporated ceramic filter.

Technical Specifications

Operating temperature: Maximum 180 °C (356 °F).
Power supply: 230 V 50 Hz, 800 W, with an optional 115 V 60 Hz.
Calibration gas valve: Check valve with a cracking pressure of >0.7 bar g.
Isolation valve: Bellow valve with pneumatic actuator, control pressure of 3-10 bar g.
Blow back valves: High flow rate check valve with a cracking pressure of >0.7 bar g, recommended pressure of 3-6 bar g.
Flange material: Stainless steel 316Ti, dimensions DN65 PN6 B.

Dimensions

The document provides detailed dimensions for the probe components, including tube and flange sizes, in both millimeters and inches.

Recommendations

Short pressure pushes are recommended to avoid a decrease in temperature in the blow back area.

Catalog excerpts

Gas Sample Probe Series SP® - Version SP2200-H/C/I/BB/F-1

Embracing Challenge Gas Sample Probe Series SP®Version SP2200-H/C/I/BB and SP2200-H/C/I/BB/F Special Features ■ Heated sample probe with integrated valves for: ■ Calibration gas injection ■ Probe outlet isolation ■ Blow back Description The M&C probe SP2200-H/C/I/BB and /BB/F is based on the standard probe SP2000-H. Following options are included: SP2200-H... Calibration gas connection tube connector 6 mm o.d. Blow back gas connection tube connector 8 mm o.d. Calibration gas injection valve /C Valve for blow back of the filter housing area /BB Valve for blow back of the incorporated ceramic filter /BB/F Calibration gas will be injected into the probe through a check valve /C directly to the sample outlet. No calibration gas is lost into the stack. An isolation valve /I shuts off the sample outlet from the internal filter area. Through a high flow rate check valve / BB, which is fixed to the internal probe area, blow back of the filter housing area and the insitu probe tube will be done. Through a high flow rate check valve / BB/F, which is fixed to the filter housing wall, blow back of the incorporated ceramic filter will be done incl. the filter area and the insitu probe tube. Technical specifications and illustrations are without M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany obligation, subject to modifications. 05.17 - 1.00.00 [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-

Open the catalog to page 1

Gas Sample Probe Series SP® - Version SP2200-H/C/I/BB/F-2

Technical Data SP2200-H/C/I/BB SP2200-H/C/I/BB/F 20 S 2010 20 S 2015 max. 180 °C (356 °F) 230 V 50 Hz, 800 W optional 115 V 60 Hz Check valve, cracking pressure: >0.7 bar g Bellow valve with pneum. actuator, control pressure: 3-10 bar g connection: 1/8"NPT i High flow rate check valve, cracking pressure: >0.7 bar g, recommended: 3-6 bar g we recommend short pressure pushes to avoid decreasing of temperature in blow back area. Connection: tube connector 8 mm o.d. material: stainless steel 316Ti, dimensions: DN65 PN6 B Part Number Operating temperature Power supply Calibration gas valve /C Isolation...

Open the catalog to page 2