Catalogs >
M&C TechGroup Germany GmbH >
Gas Sample Probe Series SP® - Version SP210-H, SP210-H/W

Gas Sample Probe Series SP® - Version SP210-H, SP210-H/W
2Pages

Catalog excerpts

Gas Sample Probe Series SP® - Version SP210-H, SP210-H/W - 1

Embracing Challenge [ IVteC®] Gas Sample Probe Series SP® Electrically heated, compact version SP210-H / SP210-H/W SP210-H Special Features ■ Sampling of dust loaded process gases ■ Small volume, fast response time ■ Easy mounting and maintenance ■ Self-regulated electrical heater ■ Alarm contact for low temperature ■ Outdoor mounting with protective cover ■ Insitu probe tube optional Application The M&C gas sample probes version SP210-H and SP210-H/W are applicable for continuous gas sampling.The compact design requires only limited space. The gas sample probe SP210-H/W is equipped with an extra protective cover preferably for outdoor mounting. Description The design of the M&C probes version SP210-H and SP210-H/W guarantees simple mounting, safe operation and problem-free maintenance. Changing the external filter element needs no tools and no disassembling of the sample line. The complete filter assembly is removed out of the probe head. This simplifies the checkup of the filter element and the gaskets. The filter area of the probe head respectively the insitu probe tube can be cleaned very easely without dismounting the sample probe. The large external filter element of ceramic with 2^m porosity is heated up with the stainless steel probe head to constant 180 °C, using a special selfregulated heating element. This avaoids dew point problems at the probe flange and filter area. A heat insulation covers all sides of the probe and ensures an optimized heat distribution as well as safe operation. The power supply of the probe can be in a range between 110V and 240V without switching. No thermostat or temperature limiter are necessary. The separate thermo switch enables a low tem-perature monitoring (<160 °C, NO). For electrical connection a junction box with terminals is mounted. The gas sample probe SP210-H/W equipped with a protective cover with quick clamps is recommended for outdoor-mounting. The stainless steel insitu probe tube SP210/ SS (option) is screwed into the DN65 PN6 mounting flange. The maximum operating temperature of the tube out of stainless steel is 600 °C. In case to avoid cooling and condensation of the sample in the insitu tube from the sample point to the heated sample probe the SP 30-H or SP 35-H heated sampling tubes can be used. Technical specifications and illustrations are without obligation, subject to modifications. 10.04/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-

Open the catalog to page 1

Gas Sample Probe Series SP® - Version SP210-H, SP210-H/W - 2

Technical Data Probe series SP® Standard, other versions on request. AP pressure loss with new filter element S-2K 4 7 15 mbar T90 time with insitu probe tube SP210/SS 4,0 2,5 <1,0 sec. Technical specifications and illustrations are without obligation, subject to modifications. 10.04/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

Open the catalog to page 2