Catalogs >
M&C TechGroup Germany GmbH >
Gas Sample Probe Series SP® - Version SP10, SP10-H

Gas Sample Probe Series SP® - Version SP10, SP10-H
3Pages

Catalog excerpts

Gas Sample Probe Series SP® - Version SP10, SP10-H - 1

spio-h Special Features ■ Sampling of dusty process gases ■ Fast response time ■ Easy mounting and maintenance ■ Electrically heated with integrated thermostat unit ■ Various materials and lengths for extension tubes and filters ■ Many optional configurations are available Gas Sample Probe Series SP®Version with internal process filter SP10, SP10-H Application The M&C gas sample probe version SP10 is to be installed for continuous sampling of high dust-loaded gases, large flow sampling, as well as for general gas sampling. Due to its compact design, it requires only limited space. It is to be mounted in a weather-proof location. Description The M&C gas sample probe version SP10 consists of a heat-resistant tube adapter with a 1” thread, to which the stainless steel sintered filter element type V10 is screwed on. The sinter filters V10-/0... with 325 cm2 large filter area or optionally the sinter filters V10-1/2... with 960 cm2, on request with internal volume reduction for faster response times, protrude directly into the sampling chamber. The total probe length can be changed from 270 mm to 2 m with a screw-on extension tube. A V-shaped deflector plate is available to protect the filter from possible abrasion. For sample temperatures up to 900 °C [1652 °F], filters and extension tubes out of Hastelloy-C are available. The sample probe SP10-H has an electric high-performance heating rod for heating the flange and the outer probe area to prevent the dew point from falling below in these areas. The temperature is controlled by a capillary sensor thermostat. For outdoor mounting, the weather protection hood 130 must be installed. Technical specifications and illustrations are without obligation, subject to modifications, 08.19 - 1.00.00 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

Open the catalog to page 1

Gas Sample Probe Series SP® - Version SP10, SP10-H - 2

Technical Data Probe Series SP® Part Number Dust load Sample pressure Ambient temperature In-situ probe length Sample temperature Mounting flange Sample gas outlet connection Filter element without volume displacer Material of sample contacting parts Ready for operation Heater temperature adjustable Power supply Electrical connection Degree of protection/electrical equipment standard Weight Non-Heated Basic Version SP10 Heated Basic Version SP10-H 01S1000 01S2000 Max. 10 g/m3* optional >10 g/m3 0.4 to 6 bar abs* -20 to +60 °C** 270 mm*, optional with extension tube up to 2000 mm V10 max....

Open the catalog to page 2

Gas Sample Probe Series SP® - Version SP10, SP10-H - 3

**ø 60 [≈ 2.4”] *ø 46 [≈ 1.8”] Power IN Optional with volume displacer Terminal box with thermostat Heating element Heating block for tube fitting Optional volume displacer Opening for sample line Technical specifications and illustrations are without obligation, subject to modifications. 08.19 - 1.00.00 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com •

Open the catalog to page 3