Embracing Challenge Full PTFE Bellows Pump Series MP®Versions MP-F05, MP-F10, MP-F05/R, MP-F10/R Versions MP-F05/EX, MP-FI0/EX, MP-F05/R/EX, MP-F10/R/EX Special Features ■ Corrosion-resistant ■ 100 % lubricant-free ■ Gas-tight ■ Maintenance-free ■ Long service life ■ A wide variety of connections available ■ Also with integrated bypass valve in the pump head to adjust the pump capacity ■ Ex versions suitable for mounting in zone 1 IIC T3 areas ■ Ex versions suitable for gases of zone 1 IIC T3 Application The bellows pump MP-F is suitable for corrosive gases. It is constructed especially for problems in the analysis technique. Description All parts of the bellows pump MP-F which get in contact with the sample gas are corrosion-resistant. As an option for connecting the pump, the upper pump head is also available in stainless steel. The pump works absolutely lubricant-free, so gases remain analytically unchanged. Due to a special bellows and valve system, the pump operates maintenance-free with a long service life. The simple valve design guarantees low maintenance costs. The pump capacity can be adjusted with a needle valve, which serves as an internal bypass. This valve is integrated into the pump head of the MP-F.../R. The pump is available in 230 V or 115 V. For other voltages, please contact M&C. The Ex versions of the MP-F pumps are designed in accordance with €^ATEX II 2G. The Ex versions are also available with 5 Nl/ min and 10 Nl/min capacity. The pump head can be connected to the gas line from the top or side. It can also be rotated in 90° steps and mounted in any of these positions. Technical specifications and illustrations are without obligation, subject to modifications. 10.18 - 1.01.01 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

[10.47“] with needle valve (option /R) [12.36“ max.] with needle valve (option /R) Prohibited pressure area Capacity (in Nl/h) without counter pressure on the vacuum and pressure side. M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111 Technical specifications and illust

Integrated needle valve Part No. 230 V 50 Hz Part No. 115 V 60 Hz Voltage tolerance Degree of protection Capacity max. Operating pressure Gas sample temperature Ambient temperature Storage temperature Current consumption 230 V/115V Power consumption cos 9 Gas connections Material of sample contacting parts Operating mode Electrical equipment standard Weight Options 05P1050 05P1060 05P1070 In accordance with IEC 60034-1 Voltage ±5 % Frequency ±2 % IP55 EN 40050 320 Nl/h (approx. 5 Nl/min) 600 Nl/h (approx. 10 Nl/min) with a counter pressure of ±50 mbar on the vacuum and with a counter pressure...

Type Examination Certificate IBExll Institut fur Sicherheitstechnik GmbH An-lnstitut der TU Bergakademie Freiberg [1] TYPE EXAMINATION CERTIFICATE [2] for non-electrical equipment of the Equipment Groups I and II, Categories M2, 2 or 3 (Translation) [3] Type Examination Certificate Number: IBExll15ATEXB005 X Measuring gas pump MP-F .../Ex Sizes: 05 and 10 with or without needle valve M&C Techgroup Germany GmbH Rehhecke 79 40885 Ratingen GERMANY [7] The design of the equipment mentioned in [4] and any acceptable variation thereto is specified in the schedule to this type examination certificate....