Embracing Challenge Special Features ■ Electrically heated up to max. 180 °C ■ Integrated thermostat ■ Status contact output ■ Sure connection technique ■ No cold bridges ■ Easy to maintain ■ Option ball valve with position identification [ IVteC®] Electrically heated valves series V3/2-H, MV3/2-H Version V3/2-H /PE, 3/2-way ball valve, electrically heated up to 180 °C, Version MV3/2-H, 3/2-way solenoid valve, electrically heated up to 180 °C Application In analysis technique, often temperatures must be kept above the sample gas dew point. Therefore, it is absolutely necessary to avoid cold bridges. In order to ensure this, the temperature regulated M&C three-way valves V3/2-H and MV3/2 H are used for the cut-off or switching-over of sample gases and test gases up to an operating temperature of 180 °C. Description The M&C electrically heated valves are fixed on a mounting plate, decoupled from heat and covered with an insulated enclosure. The heater consists of a heating element with high capacity. The temperature is adjustable on the integrated thermostat up to 180 °C with high temperature limiter and low temperature alarm. The heat insulated enclosure with a bushing for the dial thermometer is equipped with quick acting bentlever closures. The connection box with integrated thermostat is installed outside the enclosure on the mounting plate. Version V3/2-H/PE has got an additional connecting box for the contact output of the position identification. The power supply for the solenoid valves version MV3/2-H is 24V DC and the additional connecting box is installed on the mounting plate. In order to prevent cold bridges, the connecting fittings are heated by means of thermal conducting jaws. The electrically heated sample lines type 3/4/5-N/M/H - see data sheet 3.1 - are fixed with mounting brackets. Technical specifications and illustrations are without obligation, subject to modifications. 03.96/11.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-

Dimensions Electrically heated 3/2-way ball valve, version V3/2-H Alarm contact min. temperature Power in Electrically heated 3/2-way ball valve with position identification, version V3/2-H/PE ø 6,5 left right Contact output position switch Terminals Indicator 50-250° C Alarm contact min. temperature Power in Electrically heated 3/2-way solenoid valve, version MV3/2-H ø 6,5 Terminals solenoid valve 24V DC 15W currentless open from P2 to A P2 Terminals Indicator 50-250°C Alarm contact min. temperature Power in M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected]...

Part-No. Position identification Nominal width / Cv-value Operating pressure Sample gas temperature Ambient temperature Storage temperature Gas connections Temperature controller Operating temperature Dial thermometer Low temperature alarm contact Position identification Power supply solenoid valves Power supply Electrical connections Degree of protection / Electrical standard Dimensions Weight Stacknant volume Materials of sample contacting parts Mounting max. +180 °C -25 to +60 °C -25 to +80 °C tube connectors 06 mm, optional 01/4" type Swagelok capillary thermostat with high temperature limiter...