Embracing Challenge [ IVteC®] Electrically heated sample probe tube series SP® Version SP30-H..., SP30-H1.1-V, SP35-H... for gas sample probe SP2000-H... Special Features ■ Completely heated sample tube ■ Different lengths ■ Unheated pre-filters or extensions possible ■ Simultaneously heated pre-filter possible ■ Easy mounting ■ Two temperature sensor versions Application The electrically heated M&C sample probe tube SP30/35-H... is used in extractive sampling systems to avoid cooling and condensation of the sample in the insitu tube from the sample point to the heated sample probe SP2000-H. To avoid a premature demage by cooling and condenstaion in dust loaded processes, we recommend a heated tube type SP30-H1.1-V, including an insitu pre-filter V20-2/30, heated up with the tube. Description The electrically heated M&C sample tube SP30-H... is available in 0,6 m, 1,0 m, 1,5 m and 2,0 m length and the SP35-H... in 0,175 m length. The standard lengths for the pre-filter version SP30-H1.1-V are 0,6 m and 1,0 m. The tube version SP30-H..., SP35-H... has an internal diameter of 22 mm. The internal diameter of the version SP30-H1.1-V is reduced to 6 mm to optimise the tube dead volume. With a mounting flange with 4 welded screws the heated sample tube SP30-H.../-V, SP35-H.. can be easily fixed both to the flange at the sample point and the probe head SP2000-H. The heated sample tube SP30-H.../SP35-H... is equipped with a G3/4»i thread connector at the tube end. This enables fixing a standard non heated sample tube or pre-filter to the heated insitu tube. The electrical cartridge heater is located inside a double tube system, completely separated from the process. At the version SP30-H1.1-V the included large pre-filter V20-2/30 is heated up with the sample tube. The temperature of the heated tube has to be adjusted in relation to the process temperature and corresponding to the max. admissable sampling temperature. Depending on the operating temperature the sample tubes are equipped either with a thermocouple (max. 320 °C) or a PT100 temperature sensor (max. 200 °C). Technical specifications and illustrations are without obligation, subject to modifications. 12.97/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-

Probe tube with pre-filter SP30-H1.1-V Technical Data Temperature sensor Temperature controller optional, external Probe tube length L1 175 mm max. 2 m max. 1 m filter porosity 2|jm, integrated and heated Sample gas inlet connection G3/4"i DIN ISO 228/1 Dust loading Probe tube volume Sample pressure max. Ambient temperature Storage temperature Ready for operation Power supply Heating capacity Electrical connections Electrical standard Degree of protection Mounting flange Material of parts in contact with the sample terminals, max. 2,5 mm2, 2x PG13,5 cable gland EN 61010, EN60519-1 IP54 EN 60529...