Catalogs >
M&C TechGroup Germany GmbH >
Electrically heated sample lines Type 3/4/5-N/M/H

Electrically heated sample lines Type 3/4/5-N/M/H
3Pages

Catalog excerpts

Electrically heated sample lines Type 3/4/5-N/M/H - 1

Embracing Challenge Special Features ■ Regulation with external temperature controller ■ Completely assembled ■ PTFE-tube non interchangeable Type 3/ ■ PTFE-tube interchangeable Type 4/ ■ Stainless steel tube non interchangeable Type 5/ ■ Tube 4/6 or 6/8 mm DN.. ■ 3 temperature ranges N=100 °C (212 0F), M=200 °C (392 °F), H=250 °C (482 °F) [ M&C®| Electrically heated sample lines Type 3/4/5-N/M/H Type 3 with PTFE tube non interchangeable Type 4 with PTFE tube interchangeable Type 5 with stainless steel tube Application The electrically heated, 'plug-in system, M&C-sample lines series 3/4/5-N/M/H may be used with advantage in gas analysis systems. Their application helps avoid errors and acts as frost protection during transport of the sample gas from the sample point to the gas conditioning system or directly to a heated analyser (above dew point). Description The electrically heated M&C-sample lines 3/4/5-N/M/H are supplied according to clients requirements completely fabricated in the factory with connections and ends to a fixed length. Several options can be supplied: Three (3) different temperature versions (N-100 °C/ M-200 °C /H-250 °C), (N-212 °F/ M-392 °F /H-482 °F), three (3) tube/pipe versions (3/4/5) with either N 4/6 or DN 6/8 mm each, as well as five (5) inlet connections (A/B/C/D/E) and four (4) end connections (W/X/Y/Z). The robust construction of the sample line consists of a medium tube/pipe inside a thermally conductive stainless steel mesh which acts also as protection and support. The heat conductor is also coiled around the stainless steel protective mesh followed by a further two (2) layers of thermal insulation. The outer cover is a corrugated tube out of polyamide. The ends of the sample line are finished with heat resistant Silicone materials, and the entire construction ensures that the complete sample line is properly heated, including the ends. The sample line is equipped with a PT100 for temperature detection. Technical specifications and illustrations are without obligation, subject to modifications. 02.17 - 1.00.00 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

Open the catalog to page 1

Electrically heated sample lines Type 3/4/5-N/M/H - 2

Possible Connections and Styles of the Heated Sample Lines Inlet connection style 26 (1.02”) Type 3 with PTFE tube non interchangeable Sample line Typ 4 with PTFE tube interchangeable Typ 5 with stainless steel tube Sample line length ‘L‘ Dimensions in mm (Inches) Technical Data Sample lines Type 3/4/5-N/M/H Operating temperature, max. Power consumption at DN 4/6 Power consumption at DN 6/8 Pressure, max. Ambient temperature, max. Tube DN Sample line inlet and end connections Electrical connections* Power supply PT100-Sensor position Weight Sample line max. length 7 pins plug 10 A at inlet...

Open the catalog to page 2

Electrically heated sample lines Type 3/4/5-N/M/H - 3

Description Sample lines per meter Electrically heated sample line type 3 with non interchangeable PTFE tube, max. 100 °C (212 °F) Electrically heated sample line type 3 with non interchangeable PTFE tube, max. 200 °C (392 °F) Electrically heated sample line type 3 with non interchangeable PTFE tube, max. 250 °C (482 °F) Electrically heated sample line type 3 with non interchangeable PTFE tube, max. 100 °C (212 °F) Electrically heated sample line type 3 with non interchangeable PTFE tube, max. 200 °C (392 °F) Electrically heated sample line type 3 with non interchangeable PTFE tube, max....

Open the catalog to page 3