Catalogue 2024 - Rev. 2.0 M&B ENGINEERING SRL Via Nobel, 21 - 42124 Reggio Emilia (RE) [email protected] - www.mbengineering.info

LEVERLESS TIRE CHANGER MADE IN ITALY The horizontal arm is locked by a cylinder. The roller at the base of the arm guarantees optimal sliding, and being blocked by an eccentric bush it can be used to minimize any play generated by usage New helper group handle: practical, fast and ergonomic TC755LL :::: Automatic tire changer with LeverLess technology, centre post turntable and "combi" bead breaking system: with disc and with blade. The TC755LL works on all latest generation UHP and Run Flat tires up to rim diameter of 30" and 17" wheel width. LL demounting system with double support to the rim...

ACCESSORIES FOR CAR TIRE CHANGERS ACCESSORIES FOR TC755LL HELPER GROUP CLAMP 46MB201230 Helper device Mounting clamp RFT/UHP Morsetto di montaggio RFT/UHP STORAGE HOLDER LED LIGHT 46MB203067 Lateral tool holder 12V Led Light and power supply kit, factory assembled Porta attrezzi laterale Luce Led 12V e kit di alimentazione, montato in fabbrica ACCESSORIES FOR TC5000 SPACER TRUCK CONE 4TH CONE FLANGE KIT 46MB203529 Light truck spacer Light truck cone (D=122mm ■ 174mm) Distanziale per trasporto leggero Cono light truck (D=122mm 174mm) Kit adattatore per cerchi rovesci WHEEL LIFT ROLLER KIT IT Wheel...

CAR TIRE CHANGERS MADE IN ITALY Automatic tire changer with LeverLess demounting system with double support to the rim, minimizing any stress to both the operator or the tire, whilst ensuring maximum safety when handling difficult tires. Square turntable with locking capacity up to 27”. Plate equipped with a system with opposing jaws with two cylinders and replaceable tips. Bead breaker with ergonomic arm to operate on wheels of 17” in width. PG version with the inflation device fitted with a fixed control instrument with graduated gauge and pedal control. Removable pedal unit for easy maintenance....

TC722/24 "I; Automatic tire changer with pneumatic rear tilting post granting the maximum rigidity. Square turntable with locking capacity up to 27". Opposing jaws with two cylinders and replaceable tips. PG version with the inflation device fitted with a fixed control instrument with graduated gauge and pedal control. Bead breaker with ergonomic arm to operate on wheels of 15" in width. Removable pedal unit for easy maintenance Motor with dual rotation clockwise and counterclockwise and double speed controlled by pedal (7 / 14 rpm). Three phases power supply 400V 50Hz. II Smontagomme automatico...

CAR TIRE CHANGERS MADE IN ITALY TC710/22 Automatic tire changer with 41 mm hexagonal vertical arm with device to minimize tolerances and 50x50 mm horizontal arm to reduce flexures in case of Run-flat tyres. Simultaneous vertical and horizontal arm locking system, vertical arm with spring return. Pneumatic rear tilting post granting the maximum rigidity. Square turntable with locking capacity up to 25”. It is equipped with a system with opposing jaws and with two cylinders of Ø 80 mm, guarantees an optimal clamping force on all types of rims. Professional tyre inflating gun with manometer. For...

CAR TIRE CHANGERS MADE IN ITALY HELPER ARMS RANGE TC5 TC6 HELPER ARM→ T/HELP HELPER GROUP → T/HELP - T/LIGHT HELPER ARM→ T/LIGHT Tecnohelp helping device (not for TC710/22) Helper arm only for Tecnohelp (not for TC710/22) Pneumatic helper device for Tecnohelp and tecnolight (not for TC710/22) Tecnolight helping device (not for TC710/22) Helper arm only for Tecnolight (not for TC710/22) Braccio di aiuto Tecnohelp (non disponibile per TC710/22) Braccio di aiuto per Tecnohelp (non disponibile per TC710/22) Braccio di aiuto pneumatico per Tecnohelp e Tecnolight (non disponibile per TC710/22) Braccio...

CAR TIRE CHANGERS MADE IN ITALY SLIDE GUARD BLADE PROTECTION Set of 10 front tower tabs M/D head protection (not for TC724LL) Tail side tower tab M/D head protection (not for TC724LL) Slide guard kit (4 pieces) Bead breaker blade nylon protection Set da 10 protezioni frontali per torretta (non per TC724LL) Protezione posteriore per torretta di montaggio (non per TC724LL) Kit di protezioni per griffe (4 pezzi) Protezione in nylon per paletta stallonatore LEVER PROTECTION Lever plastic protection Lever WDK plastic protection Protezione leva in plastica Protezione leva WDK in plastica Protezione...

CAR TIRE CHANGERS MADE IN ITALY TC422 Swing arm tire changer that can be placed also in workshops with limited space. The position and special design of the rotation pedal allows to work from the side, the best position for swing arm tire changers. Hexagonal vertical arm to grant rigidity. Easily locked by lever, with spring loaded return. Turntable with clamping capacity up to 25”. Equipped with opposing jaws to grant optimal clamping of all rims. Jaws with grip design to allow perfect internal clamping. Minimum external clamping 10” to work on small wheels. Bead breaker with double acting bead...

TC630TF TC630 i TC630/TC630TF Automatic tyre changer ideal for use in repair shops and tyre shops. Designed to operate on car and light commercial vehicle wheels and on motorcycle wheels with the appropriate accessories. Self-centring plate with 10”-24” locking capacity, double rotation and two speeds. Vertical post equipped with conic buses and play recovery systems which allow eliminating post flexure. Rear tilting post and simultaneous vertical rod and horizontal arm pneumatic locking system, vertical arm with spring return. Body with extractable pedal unit to facilitate technical service....

ACCESSORIES FOR CAR TIRE CHANGE RS SPECIAL ACCESSORIES FOR TC630 - TC315 TC315 BIKE :X: Semi-automatic tyre changer with swing arm, vertical working arm with lever lock, side positioning of the tool with respect to the rim by means of a knob and vertical working arm with spring return. Fastening of the horizontal arm on the post has been designed to allow operating on wheels with rim size from 3,6 to 22 inch (typical of motorcycles, karts, ATV wheels and hobby and gardening machines). Body with extractable pedal unit to facilitate technical service. Standard CE-certified inflation pressure limiter...