*mydirectindustry

Catalogs
Lynch Fluid Controls Inc.
Mobile service for for coolant- and lubricant systems

Mobile service for for coolant- and lubricant systems

Product catalog summary

General Description:
This document describes the MKS 600 system, designed to simplify the draining of CNC-machine tanks containing coolant and/or lubricant, while removing contamination from machining processes. The system uses an air pressure-operated membrane pump to feed the equipment, leading the medium through a filter unit to a 160-gallon reservoir. Here, oil is separated from the emulsion using Skimmer-Technology and oil separation mechanisms. The MKS 600 can also function as an off-line filtration circuit, filtering fluid from the machine tank and returning it to the machine circuit.

Key Components:

Filter Unit: The TEF 952 return-line filter is mounted on the tank top, connected to the pressure line, and uses Interporvlies “VG” for deep filtration with high dirt holding capacity.
Control Block: Routes fluid to the filter unit, exit line, or low-pressure cleaning gun, with an extension port for retrofitting components.
Membrane Pump: An air-driven, self-priming pump designed for chemical fluids, offering low service needs, dry run resistance, and easy handling.
Oil Separation Mechanism: Features a floating oil separator with adjustable oil supply for high separation performance.

Technical Data:

Net weight: Approximately 550 lbs
Dimensions: 59 x 37 x 52 inches
Operation: Air pressure
Reservoir volume: 160 gallons
Extraction capabilities: Other fluids and chips (max. grain size 0.24 inches)
Solid particle separation: Filter fineness from 1 µm to 25 µm
Cleaning: Hand cleaning gun up to 87 PSI

Economic Advantages:
The MKS 600 system offers significant economic benefits, including reduced coolant/lubricant consumption and disposal, extended intervals between changes, and decreased service time by about 2 hours per change compared to conventional systems. It also addresses environmental protection and worker exposure to contaminated coolant, providing an ergonomic and easy-to-operate solution.

Catalog excerpts

Mobile service for for coolant- and lubricant systems-2

Filter unit Control block The return-line filter TEF 952 is mounted directly on the top of the tank and connected to the pressure line. The used filter element Interporvlies VGӔ is charact- erised by deep filtration at low pressure difference and highest dirt holding capacity. Following to the suction of the fluid by the membrane pump the control block may route to the filter unit, to the exit line or to the low pressure cleaning gun. Additionally there is an extension port for retrofitting components. > Air pressure operated membrane pump Oil separation mechanism This type of self-priming pump...

Open the catalog to page 2

Mobile service for for coolant- and lubricant systems-3

Net weight appr. 550 lbs Dimensions 59 x 37 x 52 in. Operation by air pressure Reservoir volume 160 gallons Extraction of other fluids Yes Extraction of chips max. grain size 0.24 in.pilot filter suggested Separation of other fluids separation tank Solid particle separation filter fineness from 1 m to 25 յm Cleaning of the machine hand cleaning gun up to 87 PSI >

Open the catalog to page 3

All Lynch Fluid Controls Inc. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list

Mobile service for for coolant- and lubricant systems

Mobile service for for coolant- and lubricant systems

Catalog excerpts

All Lynch Fluid Controls Inc. catalogs and technical brochures

Archived catalogs