Manifolds & Valve Packs
133Pages

Manifolds & Valve Packs Product Tips and Features Bar Manifolds 1. Standard materials are Aluminum and Ductile Iron. Other materials including Mild Steel or Stainless Steel are optionally available. Special Finishes including Black Oxide, Electroless Nickel Plating or Anodizing are optionally available. Internal galleries are equal to or greater than the nominal port connection in order to minimize pressure drops and fluid velocities. Port spacing and edge distance is maximized in order to ensure easier installation and servicing. This wider spacing requires larger or different cross-sections than typically found on some models. P to T Relief cavities in Sun and Common Cavity form are standard options, while the ISO and other types are non-standard options. No variation in the design layout for each Model regardless of Port Code. Manifolds with Flange Ports are available with UNC mounting threads and SAE Ports or with Metric mounting threads and Metric Ports as standard. UNC or Metric Mounting Bracket Kits are Standard. Four-Bolt Mounting Option for vertically mounting D03 and D05 Standard Flow Parallel Manifolds to the reservoir top and improved performance is available. Common Drain Ports where offered are supplied on both ends of the manifolds for ease of installation and connecting a series of manifolds without the need of tees or elbows. 10. Independent Pilot Pressure Ports are standard options. Common Pilot Pressure Ports are available as a Standard Option for D05H(E) High Flow and Very High Flow Manifolds and as a Non-Standard Option for D07, D08 and D10 Manifolds. 11. Dual Tank Ports on the interface of all D05H and D05HE High Flow and Very High Flow Manifolds with X & Y ensures maximum valve performance unlike many competitor products. 12. Pilot Port adapters for any D05 manifold ease the installation of any D05H and D05HE Two-Stage valves. Only order the number of stations required. Please note these adapters are best suited on the ends of the manifold. 13. “P” and “T” port isolations are available for manifolds up to 10 stations. A second gauge port is provided with “P” port isolations when possible. See chart on Page 1.00.02 for coding option. WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION Lynch Products Can Be Modified to Suit Your Application Page

Lynch- * Manifolds & Valve Packs Product Tips and Features Bar Manifolds ISOLATION PORT CODES When isolations are required in the pressure or tank ports for any Bar Manifold, the final two letters in the part number need to be modified as per the chart below. The second last character identifies the pressure port isolation and the last character identifies the tank port isolations. For Example: “P” Port Code = ^|^ =“T” Port Code 1. BA03GPS04SDUAAAA is a Four Station Standard Flow D03 Parallel Circuit Manifold with SAE Ports, no isolations and no Relief Cavity 2. BA03GPS04SDUCAAA is...

Manifolds & Valve Packs Product Tips and Features Bar Manifolds NON-STANDARD OPTIONS & ACCESSORIES 1. Some single station manifolds are too narrow to accommodate a gauge port. If a gauge port is required, please request the wide spacing option. For Example: BA03GPT01SDUAAAA is an aluminum D03 single station manifold with gauge port. Some applications require smaller work ports than the standard model. Many bar manifolds can be supplied with work ports one size smaller than the standard shown in the catalog. For Example: BA03GPS03SCUAAAA is an aluminum D03 three station manifold with SAE 6 A...

Manifolds & Valve Packs Lynch Products Can Be Modified to Suit Your Application Phone: 1 (888) 626-4365 or + 1 (905) 363-2400 Fax: 1 (800) 263-5807 www.lynch.ca sales@lynch.ca

I Mich Manifolds & Valve Packs UNC Mounting KIT includes: 8 -5/16"-18 x ,625"SHCS 8 -ITL Washers 2 -Brackets Metric Mounting KIT includes: 8 -M8x1.25 x 16mm SHCS 8 -ITL Washers 2 -Brackets WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION Lynch Products Can Be Modified to Suit Your Application Phone: 1 (888) 626-4365 or + 1 (905) 363-2400 Fax: 1 (800) 263-5807 www.lynch.ca sales@lynch.ca

Manifolds & Valve Packs SHADED AREA AVAILAB PART NUMBER SYSTEM Ductile Iron WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION Lynch Products Can Be Modified to Suit Your Application Phone: 1 (888) 626-4365 or + 1 (905) 363-2400 Fax: 1 (800) 263-5807 www.lynch.ca sales@lynch.ca

Lynch- * Manifolds & Valve Packs Metric Mounting KIT includes: 8 -M8x1.25 x 16mm SHCS 8 -ITL Washers 2 -Brackets WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION Lynch Products Can Be Modified to Suit Your Application Phone: 1 (888) 626-4365 or + 1 (905) 363-2400 Fax: 1 (800) 263-5807 www.lynch.ca sales@lynch.ca

Manifolds & Valve Packs D03 Std Flow Parallel Circuit Manifold (4 Bolt) Note: Extra length ensures P & T galleries from interface are not obstructed by the end port fittings "L"(See Chart)- (See Page 1.99.01 for Relief Cartridges) OPTIONAL RELIEF VALVE\ i PARALLEL CIRCUIT WITH OPTIONAL RELIEF VALVE SHOWN PART NUMBER SYSTEM Bar Manifold WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION Lynch Products Can Be Modified to Suit Your Application Phone: 1 (888) 626-4365 or + 1 (905) 363-2400 Fax: 1 (800) 263-5807 www.lynch.ca sales@lynch.ca...

Lynch- * Manifolds & Valve Packs D03 High Flow Parallel Circuit Manifold (See Page 1.99.01 for Relief Cartridges) DIMENSIONS FOR 1 STATION WITH RELIEF CAVITY & GAUGE PORT NO GAUGE PORT SUPPLIED WITH SINGLE STATION MANIFOLD SHADED AREA AVAILABLE ON SPECIAL ORDER ONLY PART NUMBER SYSTEM WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION Lynch Products Can Be Modified to Suit Your Application Phone: 1 (888) 626-4365 or + 1 (905) 363-2400 Fax: 1 (800) 263-5807 www.lynch.ca sales@lynch.ca